1/8 Radix XP 4WD 6S Brushless RTR Buggy (No Battery or Charger)
Radix Features:
Same chassis as C-00182 PYTHON XP-6S
New RADIX6 Body
New Tires
2050kV 2-6S 4-pole brushless motor
Transmission: 4WD Shaft Driven
Bearings: Full set of ball bearings
ESC Type: Waterproof 7.2 - 22.2 V Brushless - Programmable with LiPo cut off
Few RC experiences can match the unrivaled speed, handing, durability, and performance of a premium 1/8 scale electric 4WD buggy. The new Radix 6 XP 4WD 1/8 Scale Brushless Buggy from Team Corally delivers this and more in a convenient RTR package! Using a 4-6S LiPo source to power the included 2050KV brushless motor, you can utterly dominate the track or bash terrain. Want to race? It should be no surprise that the Radix 6 XP is a perfectly capable entry-level competition race car for use in Sportsman 1/8 Electric 4WD Buggy Racing (using 4S power).
Utilizing a durable, efficient all-metal four-wheel drivetrain, fully independent suspension, racing chassis and aerodynamic, high-downforce racing bodyshell design, this is the ultimate electric 1/8 buggy for anyone looking for awesome speeds, unsurpassed handling and the durability to survive almost racing or bashing conditions.
All-Season Driving, Anytime and Anywhere
The Team Corally Radix 6 XP Racing Buggy features a full suite of water-resistant electronics, so it's ready for driving in most any conditions. Not only is the ESC resistant to splashes of water and mud, but the steering servo and receiver are also protected from the elements by special water-resistant PCB coatings. The receiver is further protected by a sealed enclosure to protect against dust, mud, and moisture. Of course, aerospace-quality rubber sealed ball bearings are standard on the Radix 6 XP, meaning you can drive virtually anywhere and in most any conditions
(Please note: no RC vehicle should be driven or submerged in water or mud. Take care when driving in extreme conditions, and proper maintenance such as cleaning and lubricating should take place after driving in mud, water or near salt water.)
Racing Style Chassis for Extreme Performance
Inspired by top-tier professional racing machines in the RC industry, the Radix 6 XP utilizes an aluminium pan-style chassis for the most efficient and durable chassis layout. With an optimized forward weight bias, the heaviest drivetrain components and other systems are kept as close to the front as possible. Robust, triangulated front and rear chassis braces provide additional rigidity that allows the aluminium big bore shocks and HiCC8 composite suspension parts to perform without the negative effects of chassis plate flex. The reinforced composite chassis side guards have integrated front brackets to provide additional protection for the polycarbonate body. The exclusive Team Corally's exclusive SPL system secures shock spring perches and prevents spring misalignment during extreme compression/rebound while the innovative RSP Sway Bar system keeps the Radix 6 planted in corners and ensures consistent handling on all surfaces.
Massive 2050KV Brushless Power
With a Team Corally Kuron 2050KV 4-pole motor mounted on a torsion-resistant aluminium 2-piece sliding mount, you can be confident of attaining maximum speeds for big-air stunts! The motor is fitted with a hardened steel pinion gear, which mates to a hardened steel spur gear on the center differential.
Looking to achieve remarkable top speeds with a pull of the trigger? Speeds of over 100 km/h (60+ mph) are easy - just fit the appropriate battery!
LiPo Power Ready
The battery holder of the Radix 6 can fit batteries packs in all the popular sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can utilize 4S-6S LiPo batteries to optimize performance on any surface or in any conditions!
Durable Steel Drive System with Three Fluid-Filled Differentials
As usually seen only on premium competition-level RC vehicles, the Radix 6 is fitted with front, center, and rear silicone fluid-filled and sealed limited-slip differentials that ensure the full amount of power from the 2050KV Kuron motor gets to the ground. With easy removal and maintenance, you can even tune each differential individually to fine-tune the amount of traction at either end of the buggy! Inside, you'll find a complete set of metal gears and outdrive cups that connect to steel central driveshafts. The front end is driven by CVD driveshafts, while the rear is driven by robust metal dogbones, with the entire drivetrain supported by aerospace-quality 8x16x5mm rubber sealed ball bearings for maximum efficiency and durability.
Premium Alloy/Steel Center Differential Assembly
The critical center diff used on the Radix 6 XP features an aluminium alloy case and durable, steel spur gear for unsurpassed performance and reliability. The metal case allows optimal alignment of the internal gear assembly by improving heat dissipation and eliminating fluid loss, while the steel spur gear ensures maximum power delivery and resistance to damage from dirt or debris.
Convenient One-Piece Composite Steering Rods and Upper Suspension Links
The Radix 6 XP features composite HiCC8 nylon composite links with captured pivot balls to guarantee proper alignment with ideal suspension and steering geometry.
Optimized Racing Suspension
The Radix 6 XP features a robust pivot ball-style front suspension utilizing steel pivots and steering turnbuckles in addition to tough composite suspension arms. The rear suspension features composite outboard hubs and one-piece composite upper suspension links. At each corner, durable HiCC8 composite suspension arms and threaded, adjustable 16mm big bore oil-filled shock absorbers produce plush, compliant handling.
High-Speed All-Terrain Tyres
The tyres used on the Radix 6 feature foam inner liners and are glued on super-rugged multi-spoke wheels which are secured to 17mm hex drive hubs. The innovative, multi-surface tread pattern is at home on dirt or tarmac and manufactured from a proprietary rubber compound that delivers amazing forward bite and cornering grip while minimizing ballooning for maximum control at any speed in any conditions.
Varioprop S2R Steering Wheel Controller
The Radix 6 is fully controlled by the ergonomically designed pistol-grip style radio transmitter, which features the latest 2.4GHz technology for interference-free control at a distance of 300m. The realistic steering wheel design makes driving intuitive and comfortable. The pistol grip trigger provides perfect control of the throttle, with forward and reverse controls combined in a single control. Learning how to control the Radix 6 is quick and easy with the S2R controller!
The Radix 6 XP RTR is an innovative, durable, multi-use all-terrain machine! If you enjoy the sleek looks, unrivalled performance, and razor-sharp handling that only 1/8 buggies can deliver for assaulting tracks, bash spots, or achieving awesome jumps over the toughest landscape...look no further than the Radix 6 XP!
Specifications:
Weight: 3370g
Wheelbase: 326mm
Length: 497mm
Width: 305mm
Height: 175mm
Battery tray dimensions: (LxWxH): 143x50.5x50mm
Required items:
Four (type AA) batteries, 7.2-22.2V LiPo battery with XT90-connector, compatible charger
Description:
This is the HS-425BB Pro Dual Ball Bearing Servo from Hitec. The HS-425BB is one of the most durable and reliable servos Hitec has ever offered. With its dual ball bearings, high impact resin gear train and high performance circuitry, the HS-425BB features excellent centering and resolution.
These Feather Flags are really great. Super easy to set up and are rally compact after take-down. Do you want to promote RedwingRC at your event? The RedwingRC Feather flag is a great option at a reasonable price!
Show your Redwing Spirit!
(More Images Coming Soon)
Specs:
10 feet tall when installed in the ground
Flag section is 8.5 feet tall
Moves slowly in the breeze
Metal anchoring attachment extends 18"into the ground
