Pilot 1:6 Scale (6C)

Pilot - "Jacob" (1/6 scale)

Pilot - "Joe"

Pilot - "Joe"

Pilot - WWII German Pilot (1/6 scale) 

Pilot 1:9 Scale 

Pilot 1:7 Scale 

Pilot 1:6 Scale 

Pilot 1:6 Scale 

Pilot 1:5 Scale 

New Design: 20cc Edge Profile

Now with Carbon Fiber Reinforcements!

SIDE FORCE GENERATORS INCLUDED!

We are growing again with the addition of the 20cc Edge 540 profile! The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 20cc version is no different.

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline.

This new 20cc Edge 540 comes with the same great features that Redwing provides with all of our profile planes. It is set up and ready for a DLE 20 to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 20cc Edge is that is has a carbon fiber tube running the FULL length of the fuselage for added strength. Even those not fans of profiles will fall in love with this beauty! Holds the DLE 20 or DLE 20RA perfectly and the 20cc Extra 330 profile has a beautiful red and silver covering job

The 20cc Edge 540 profile comes in 2 new attractive schemes designed by Adam Strong. Get them while they are in stock. The last time we added one of our affordable new lines of profiles we ran out in weeks! Don't let this one slip by.

Buy Replacement Parts
Product Manual

Specifications:

• Wing span: 1651mm / 65"
• Wing area: 69.2 sq. dm/ 1072 sq. in
• All up flying weight: 3100g / 9 lbs
• Length: 1587.5 mm/ 62.5"
• Engine: DLE 20 / DLE 20RA
• Radio: 5 channel
• Recommended Spinner Size: 2.5"
• Recommended CG: 5.25" from the leading edge at the root
• Recommended Prop Size: 17x6
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Adjustable push rods
• Carbon fiber tube running the FULL length of the Fuselage
• Carbon fiber Wing Tube
• Fast fly and easy build features, such as : Pre drilled hinges
• Removable wings
• Ball linkages

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

MKS HBL850

Description:

The MKS HBL850 is a high quality Digital "Brushless" Servo with all aluminum casing and metal gears. The heat sink on the outside of this servo is very helpful for dissipating the heat and keeping your system cool.

NOTE: This high torque servo uses a large 8mm output shaft. Traditional servo arms will not fit.

New and Improved Technology!

Why choose brushless servos? They have many benefits, one being that they only use the power necessary to get the job done. If the servo encounters resistance then more power is given, if it senses less resistance then less power is given. With brush servos, full power is used no matter what the situation.

Specs:

• Torque:
  • 252.75 oz/in at 6V (18.2 kg/cm)
  • 312.47 oz/in at 7.4V (22.5 kg/cm)
  • 345.80 oz/in at 8.4V (24.9 kg/cm)
     
• Speed:
  • .1 sec at 6V
  • .079 sec at 7.4V
  • .071 sec at 8.4V
     
• Voltage: 4.8V to 8.4V
• Weight: 2.57 oz (73g)
• Size:1.39 x .59 x 1.12 in (35.5 x 15.0 x 28.5 mm)
   
• Operating Temp- -10~60centigrade
• Working Frequency - 1520μs / 333hz
• Dead Band- 0.0008ms
• 29.5 cm connector wire
• BRUSHLESS Motor
• Indirect Potentiometer Drive
• Double ball bearings
• All Aluminum casing
• Chrome-Titanium alloy gears

The NEW Fortitude V2 gas tanks are here!!!

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

Video:

V2 Features:

• Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.


• Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.


• Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.


• Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.


• We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

• Size: 8 ounce (236 ML)
  • Length 5 3/8” x Width 1 7/8" x Height 1 7/8” (136.5 x 49.5 x 49.5 mm)
• Weight: 1 ounce
• Fittings are part of the cap/ internal tubing
• Filtered clunk
• Super light!
• Crystal clear
• Seamless
• Includes: Tank/foam/velcro
• Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "