PowerBox Evolution, with Sensor Switch & Patch Cables
PowerBox Evolution, with Sensor Switch & Patch CablesClick Here for the Instruction Manual The PowerBox Evolution is always the first choice when a small, robust battery backer system is required: the typical range of applications extends from warbirds to 3D aerobatic models and even to jets. The first series of the Evolution was introduced back in the year 2004, and since that time it has been continuously developed and improved. For example, the current version provides six remotely accessed channels. The capacity of the regulators has also been significantly increased by redesigning the whole base plate to act as a heat-sink. The output voltage can now be set to 5.9V or 7.4V, which means that the Evolution is an excellent choice for standard 6.0V servos as well as HV systems. In both cases the constant output voltage ensures consistent running and extended effective life for your servos. The unit is switched on using the SensorSwitch which is included in the set as standard; the procedure could hardly be simpler: pressing the SET button prepares the switching process, and a brief press on buttons I and II actually switches on the two power circuits. This effectively eliminates the danger of switching the backer on or off accidentally, and provides a means of switching and checking both switched circuits independently of each other. The SensorSwitch is also used to enter the battery type; this information is required for the integral battery indicator. The two rows of LEDs indicate the state of charge of the batteries in four stages. The backer also includes a minimum voltage memory which stores the lowest voltage value which occurs during a flight, enabling the pilot to monitor his batteries more accurately. After the flight the minimum value can be read from the LEDs by pressing buttons I and II. The Evolution is fitted with integral signal amplifiers and RF interference suppressors to ensure that signal strength to the servos is adequate when long extension leads are used. To prevent possible interaction between the servos, the backer is fitted with a circuit which effectively suppresses any servo feedback currents which might occur. FEATURES:
SPECS:
Contents:
|
PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch
|
PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch |
PBS-4110
$543.50
PowerBox Competition SR2, with Sensor Switch & TFT-Display
PowerBox Competition SR2, with Sensor Switch & Display |
PBS-4450
$474.12
FlyWheelz 4" (102mm) Eight Spoke PU Wheels (pair) + 2 extra tires
| FlyWheelz 4" (102mm) Eight Spoke PU Wheels (pair) + 2 extra tires |
SPO-WRA-009
$89.99
Scorpion SII-3014-1040KV (V2) - 48" Aerobatic Airplanes (3s) - (30-60+ oz, 800w)
Scorpion SII-3014-1040KV (V2) - 48" Aerobatic Airplanes (3s) - (30-60+ oz, 800w)
OverviewThe Tomcat G30cc Motor For 30cc gas airplane This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance. Specifications
|
MTR-0127
$109.99
FrSky X10S Express 2.4GHZ Transmitter Bundle (Silver) w/Battery
FrSky X10S Express 2.4GHZ Transmitter Bundle (Silver) w/Battery
Product DescriptionWith 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.
Features
Standard Programming
* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions |
FRK-3011087-Batt
$449.99
