PowerBox Source
PowerBox SourceClick Here for the Instruction Manual The PowerBox Source is a logical development of the successful BaseLog, taking due account of requests from customers and modern telemetry system requirements. We have managed to reduce the backer’s size by optimising the heat-sink design, and as a result the PowerBox Source is now also suitable for small models with high power requirements. This small energy package offers enormous performance reserves, and compares very well even with larger battery backer systems. The unit can be connected to an optional small O-LED screen which provides a display of all battery data even when the backer itself is inaccessible in the model. However, the full capability of the PowerBox Source can still be exploited even without the screen: the Data socket enables the user to access all settings either using a smartphone and a BlueCom Adapter, or a laptop or PC using our USB interface. Core pilots, in particular, can control all aspects of the PowerBox Source from the transmitter without any extra accessories. Reflecting the current state of technology, all battery-relevant data can now be transferred to the transmitter via the telemetry system. The PowerBox Source can transfer telemetry data to Jeti, Graupner, Multiplex and Futaba transmitters as well as the Core telemetry system. An additional teleconverter is not required for Futaba. The PowerBox Source can be set to any of four different output voltages: 5.9 V – 7.4 V – 7.8 V and unregulated; in the latter case the battery voltage is passed through with minimal loss. The MPX inputs and outputs are fitted with retaining clips / lugs to prevent the connectors slipping out when subjected to severe vibration. FEATURES:
SPECS:
Contents:
|
PowerBox Royal SRS, 18-Channel, with LCD, GPS Sensor & Sensor Switch
| PowerBox Royal SRS, 18-Channel, with LCD, GPS Sensor & Sensor Switch |
PBS-4710
$815.99
PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch
|
PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch |
PBS-4110
$543.50
PowerBox Champion SRS, 16+2-Channels, with LCD & Sensor Switch
PowerBox Champion SRS, 16+2-Channels, with LCD & Sensor SwitchPowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch |
PBS-4520
$543.50
PowerBox Evolution, with Sensor Switch & Patch Cables
PowerBox Evolution, with Sensor Switch & Patch Cables |
PBS-4230
$217.00
PowerBox Competition SR2, with Sensor Switch & TFT-Display
PowerBox Competition SR2, with Sensor Switch & Display |
PBS-4450
$434.50
PowerBox PowerExpander SRS, (Multiplex or Deans Connector)
PowerBox PowerExpander SRS, (Multiplex or Deans Connector) |
PBS-3430
$140.50
PowerBox Gemini II Power Switch, Regulated to 5.9V & 7.4V
PowerBox Gemini II Power Switch, Regulated to 5.9V & 7.4V |
PBS-3125
$136.50
Tiger Moth 1400mm Wingspan 4CH EP & GP Laser-Cut Wood Model Kit
| Tiger Moth 1400mm Wingspan 4CH EP & GP Laser-Cut Wood Model Kit |
DW-S0904
$229.99
Zap CA Glue (Thin) 2oz Pink Bottle
| Zap CA Glue (Thin) 2oz Pink Bottle
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PT-071
$14.99
