PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch

PowerBox Pioneer

PowerBox Evolution, with Sensor Switch & Patch Cables

PowerBox Competition SR2, with Sensor Switch & Display

PowerBox PowerExpander SRS, (Multiplex or Deans Connector)

PowerBox Gemini II Power Switch, Regulated to 5.9V & 7.4V

PowerBox Smokepump, Smoke Pump

2.5 Gallon Red Fuel Tank and Electric Pump with ESC Option

Includes:  18” Fill Line Extension with 30" Return Line and Funnel

NOW cap comes with the No-Spill Cap and Nozzle and can has clear window to see fuel level!!

Features electric pump, fuel probe filler and return line to return the gasoline to fuel tank with no waste or spill. Inline fuel filter traps contaminants before they can be introduced into plane's fuel system! System comes with electric pump and are fully assembled. Can be used for Gas, Smoke, Kero or Diesel.

All Electric Pumps are 12vdc pumps but if run @ 12v's these pumps may pump at too high a pressure. Pumps w/o ESC (Electronic Speed Control) to adjust speed of pump use a 7.2v<9.6v NiMh ~  A123 or LiFe 9.0v or LiPo 7.4v battery. Units w/ESC may use up to a 12vdc pack Battery. Units w/o ESC: may also try different battery voltages to change pump speed! 

Options:

• May Add battery and charger: 110vac Pulse Peak Charger, 9.6v/4000mAh NiMh battery + $80
• Electronic Speed Control (ESC) + $60

Note: Electric pumps have XT60 plug that will also accept EC3 female plug

Special Order Item allow 3-4 Weeks for delivery

EX-PRO RRS

16 channel high power expander with Auto Protocol technology.

Small Yet Powerful and with Auto Sense... Welcome to the new generation of Power Expanders!

EX-Pro RRS is a high powered servo distribution system designed for all large scale models. It boasts Auto protocol discovery with dual (or single) receiver inputs (tripple for SRXL2) for receiver redundancy, 16 output channels matched one to one with your transmitter. EX-Pro boasts a high powered design capable of powering any model with todays high powered digital servos.

Coupled with the AR ProLine servo cables and you have the absolute best possible combination of power delivery for your high energy flying machine.  

Auto Protocol sensing and Supports multiple Protocols

Whether you fly Futaba, Jeti, Spektrum, JR, Core, Graupner or FRSky the AR EX-Pro RRS has you covered. With built-in downlink telemetry for each radio system and the ability to change the protocol using our exclusive auto protocol discovery feature, the EX-Pro RRS can be easy changed from model to model with different receivers in each. 

Sixteen programmable outputs

Looking at that next big project and wondering how you’re going to power all those servos, the EX-Pro RRS is equipped with 16 input channels and 16 outputs, all via a single cable connected to your receiver. Each channel is matched one to one with your transmitter so you can program simply and easily in your transmitter. Building that next giant scale 3D or IMAC model the  EX-Pro has it covered.

Easy to Use

EX-Pro RRS comes with preset channel mapping that matches your chosen radio brand so model setup is really simple.  

Telemetry ready

EX-Pro RRS gives you live feedback of both your batteries on your radio. Monitor the voltage, capacity and current drawn from the model's batteries at any time during the flight. Log maximum current draw during extreme manoeuvres (TX must be able to display maximum current draw) to ensure your model's servos are getting the full power. Helps to ensure your batteries are ready for the next flight.* 

RRS - Redundant Receiver technology

EX-Pro RRS is the safest in signal sharing technology, the redundant receiver system ensures your model by utilising two receivers. Unlike other power systems Smooth Flite reads signal from both receivers at all times and runs an intelligent algorithm to select the best signal.

In the unlikely event that a receiver fails then EX-Pro RRS switches to the better receiver in less than 0.5 of  a signal frame to ensure you will have constant control of your model. Reliability is key with models today, with our redundant receiver system you can ensure your model is always reporting back to you.

(Optional) Vibrant colour touch screen display.

Of course we offer an optional touch colur screen for EX-Pro so you can visually check  parameters if you like. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.

Dual battery redundancy, power management you can trust.
Ever wondered how many flights you have left before a charge, what about the health of your packs. Ensure that your model is safe and ready to fly with our dual battery redundancy technology. We link the batteries together, giving your model a powerful system capable of more flights before a recharge. 

View the EX-Pro RRS Users Guide PDF file 

SPECIFICATIONS:

* Redundant Receiver system – works with dual or single receiver system

* Auto Discovery Mutli-protocol support SBus2, Spektrum SRXL and high speed SRXL2, JR/DFA XBus, Graupner HoTT, Jeti EXBus, SRXL2, FRSky adn Sport, All SBus compatible transmitters including CORE.

* Telemetry ready

* 16 Input channels mapped directly to 16 output channels.

* Works with single or dual battery configuration.

* Works with all battery chemistries. LiFe. LiPo, Lion. (High power batteries required)

* Full Dual Battery Redundancy - If one battery fails the other battery takes full control.

* (Optional) Vibrant Colour 2.4inch diagonal touch screen with 64k colour

* EX-Pro RRS dimensions 2.59 x 1.92 x 0.47 inches (66mm x 49mm x 18.5)mm

* EX-Pro RRS weight (47gms).

Curtiss P-40 Warhawk Micro RTF Airplane w/PASS System