Venom 25C 1S 150mAh 3.7 LiPO Battery for E-Flight Blade # 1584

50C 6S 5000mAh 22.2V LiPO Battery with Universal 2.0 Plug

Venom 75C 3S 2200mAh LiPo Battery with Universal 2.0 Plug

Fly 50C 3S 2200mAh 11.1V LiPO Battery w/ Universal 2.0 Plug

Fly 30C 3S 3200mAh 11.1V LiPO Battery w/ Universal 2.0 Plug

Fly 30C 4S 2200mAh 14.8V LiPO Battery w/ Universal 2.0 Plug 

Fly 30C 3S 2800mAh 11.1V LiPO Battery w/ Universal 2.0 Plug

RGRB1208 

Standoff (25mm) 100-120CC (Anodized Gas Engine 25m Stand Off Mounting Kit w/6mm Nuts & Bolts- 4pcs) 

High Quality 1" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

Drill Jig Small (DLE 30/35RA/40/55/55RA/60/61/65, DA 50-55)
This Drill Jig is a high quality heavy steel jig that can be used to perfectly drill your props and spinners for the DLE 30cc, DLE 35RA, DLE55, DLE55RA, DA, DL, DLA, 50cc, MLD 28cc, and EVO 54cc

Simply slide the prop or spinner onto the guide and tighten down the bolt to secure it and drill out the holes using the included drill bits!