The Dynam Meteor V4 Blue is a High-Speed 12-Blade 70mm EDF Sport Jet. The remote-controlled airplane is constructed from durable EPO and pre-painted from the Dynam factory. The servos, TomCat Skylord-60A ESC, 70mm EDF Fan, and Detrum BM2827-2600KV brushless outrunner motor are pre-installed in the model. This RC airplane is designed for high-speed flying with a powerful brushless electric ducted fan. This model is one of the fastest jets in Dynam's arsenal and comes with servoless electronic retractable landing gear. The Dynam Meteor V4 Blue EDF PNP Jet is virtually ready to fly! All you need is a GAVIN 8-channel radio, 6-channel receiver, 4S 14.8V 2600mAh Li-Po 25C Li-Po battery, and you're ready for an adrenalin-pumping thrill ride!
The Dynam Meteor V4 Beginner EDF Jet is an impressive RC plane that can provide hours of entertainment for both intermediate and experienced pilots. With a wingspan of 910mm (35.8"), this plane features a powerful 70mm EDF unit for high-speed flying. The radio-controlled plane is made from high-quality EPO foam, making it durable and lightweight. The Meteor V4 SRTF comes with a 8-channel transmitter and receiver, so you can fly it right out of the box. With its sleek design and impressive performance, the Dynam Meteor V4 Blue is essential for any RC hobby enthusiast.
Dynam METEOR V4 70mm EDF Sport Beginner EDF Jet: Unmatched Thrust-to-Weight Ratio for High-Speed Aerobatics
Upgraded 4S EDF System: Optimized for powerful, smooth vertical performance. Features a factory-balanced 70mm ducted fan delivering 1.8kg of thrust from a 1.4kg airframe. The low-drag aerodynamic design enables explosive acceleration, vertical climbs, and crisp aerobatics.
Pre-Applied Waterslide Decals: Factory-perfect alignment with a durable, glossy finish.
Precision Detailing & Finish: Comes fully assembled with a high-quality graphic scheme (white, grey, black, and ice-blue). Includes functional retractable landing gear and a detailed canopy. The lightweight airframe is built for durability.
Snap-Fit Nose Cone: Designed for quick removal and replacement.
Pre-assembled cockpit with new black canopy: Ready-to-fly setup.
Push-pin canopy lock: Secure and easy-to-use push-pin latch for the cockpit.
Carbon-Reinforced Wing: 3 embedded spars + 2 rods for max rigidity and precision.
Quick-Assembly Design: Uses quick-connect screws for fast setup—get from box to flight in minimal time.
Glue-Free: 6-screw tail; 4-screw horizontal stabilizer; 3-screw wing & fuselage. A completely glue-free assembly with quick-connect design. The wing attaches via a rapid 3-point locking system.
Metal retract pivot block: Upgraded metal retract pivot block ensures smooth rotation and enhanced durability for the retractable landing gear.
Added Flaps for Precision Landing Control. This feature provides increased lift at lower speeds, allowing for steeper descent angles and shorter, more controlled landings—enhancing both the scale realism and flight performance.
Pre-installed hinges for perfect alignment—delivering smooth, accurate control and superior aesthetics right out of the box.
Upgraded retractable landing gear w/ GLCU: Smooth, reliable operation for scale takeoffs and landings.
Realistic metal landing gear fairings: Added landing gear covers for a more scale appearance.
Complete 7-Servo Setup with Professional Control Linkage: This system features ball links for slop-free precision, screw-lock control horns for reliability, hidden servo covers for a clean finish.
What's the difference between RTF, BNF, SPNP and PNP?
PNP (Plug-N-Play) RC airplanes have everything you need EXCEPT a transmitter, receiver, and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, and servos.
BNF (Bind-N-Fly) RC airplanes come with everything you need to get in the air EXCEPT the Transmitter and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, and an iStone gyro receiver. They are easy to use, versatile, and safe, making them the perfect choice for beginners and experienced pilots. The BNF (Bind and Fly) version, receivers such as the MSR66A work exclusively with Detrum transmitters.
Dynam SPNP (PNP + iStone All V2) RC airplane is a versatile and user-friendly aircraft designed for RC enthusiasts. Combining an easy plug-and-play setup with the advanced iStone stabilization system, it suits a wide range of pilots. The PNP + iStone version includes the iStoneAll V2 6-axis gyro stabilizer, compatible with major radio transmitter brands like Futaba, Spektrum, Detrum, and etc., providing excellent versatility and flight performance.
iStone All V2 Gyro Stabilizer Features:
6-axis high-precision stabilization
Auto-recovery and one-click rescue
Compatible with most receivers
Adjustable parameters and sensitivity via 3-in-1 programming card with LCD
Gyro-off mode for manual flight
The PNP configuration and iStone All V2 stabilization system make this plane ideal for beginners, while offering features appreciated by intermediate pilots.
Dynam SRTF version is based on the standard RTF (Ready to Fly), which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.
iStone Gyro Receiver (The receiver integrated with iStone stabilizer):
Six-axis gyro high-precision stabilization function, auto-recovery, one-click rescue. Incredibly accurate and greatly improves the flying experience.
Regarding different aircraft, the parameter and sensitivity of the gyro receiver can be programmed with a Detrum transmitter (Gavin6C/Gavin8C/Blitz DT9) directly.
Quick and easy setup process. If you don't want Gyro to join the flight, just choose Gyro off mode on Transmitter.
Notes: If you want to be equipped with GPS autopilot or receiver or parts, don't hesitate to contact us at [email protected]
$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.
Description: The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.
The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.
The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.
Specifications:
Torque:
166.7 oz/in at 4.8V (12.0 kg/cm)
197.2 oz/in at 6V (12.8 kg/cm)
Speed:
.13 sec at 4.8V
.11 sec at 6V
Voltage: 4.8V - 6V
Weight: 2 oz (59g)
Size: 40x20x39mm
Gear Style: Futaba Arms
Modulation: Coreless Digital
Gear Type: Titanium
Weight: 2oz (59g)
Size: 40x20x39mm
Watch this video of the XQ 4013 beating the Hitec 7985mg
Features:
Titanium Gears
Waterproof
Coreless
Digital
High Torque/High Speed
Smooth resolution
Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!
+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty
Description:
Glow power isn't the only option anymore. The DLE-20 not only fills the displacement gap, but includes a beam mount to make the glow-to-gas upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment of the DLE 20cc. A generous package of "extras" and electronic ignition for starting ease and top performance make the DLE 20 an attractive alternative to glow…and a solid buy for value and performance.
We supply a free 2 year warranty with our DLE 20, and also back it with our in house repair of DLE engines.
