Durafly Balsa Series - Ryan STA (10e) 965mm (38") ARF/PNP
| Durafly Balsa Series - Ryan STA (10e) 965mm Plug and Fly (ARF/PNP) The Ryan STA was one of the prettiest looking trainers to emerge from the 1930's "Golden Age" of aviation, the "A" variant of the Ryan ST was designed for aerobatic's, which Ryan converted to produce the military STM version, this was basically the same aircraft with changes made to comply with military requirements. The Ryan STA is a favourite with scale model fans, not suprising given it's combination of good looks and very solid & predictable flight characteristics. This superb Durafly Ryan STA is a model of a YPT-16 version and certainly does this good looking aeroplane justice! The Durafly Balsa Series is firstly and foremost about quality, the superbly constructed airframe is both lightweight and robust, the expertly applied covering is top notch and the model is finished off with superbly painted glass fibre wheel pants, cowl, seat hump and air exhaust vent. The quality of the pre-installed power train is also first rate, with the Ryan boasting a powerful NTM brushless outrunner and Turnigy ESC combination in the nose. Likewise, the pre-installed servo's are the widely respected and trusted HXT 900's, which have plenty of torque for operating the Ryan's control surfaces. The pre-installed hardware, like the glass fibre control horns is top quality and the control rods are secured by linkage stoppers meaning non of the usual plastic items are found on this superbly made scale model. Being balsa, you would expect the Ryan to take a little longer to assemble than a foamy but equally, it is so much more rewarding, even taking into account the high level of pre-finishing that is already done for you. This superb model is also very practical and features a large canopy for easy battery access and a removable 1pc wing for easy transportation. There is no doubting the advantages that balsa models offer over foam, the lightness and precision of wood construction offer a certain crispness to the flight characteristics that foam can rarely match, also balsa models will look good for years if looked after as they don't suffer from hanger rash so easily. Durafly have broken new ground in introducing a new range that combines the ease of use of a Plug and Fly foamy with the quality of a top notch balsa model and there is no doubt that this amazing looking Ryan flies every inch as good as it looks. The combination of a light wing loading and powerful motor make the Ryan a superb flying scale model and even at as little as 1/3 throttle, this fantastic looking YPT-16 cruises round with authority. Once opened up, the STA is just a joy to sport fly, loops, rolls, stall turns, split-s and so on can be executed with precision. The final bonus is that the 2200mAh battery (not included) and efficient motor/prop combination offer excellent flight times making this handsome plane a fantastic all round package. The Durafly balsa series offers the best of all worlds in the Parkfly catagory......welcome to the new era! Features:
Specs:
Requires:
$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost. |
XQ 4013 digital 6v
| Description:
Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit! |
X-4013
$42.50
Hellcat V2 4S with Flaps
| Description: *Free shipping is for continental US only RedwingRC Plug-and-Play aircraft! Say hello to the F6F, also known as the Hellcat. This plug and play version is made from EPO foam which has proven to be crash resistant. If you are a warbird enthusiast, then the Hellcat is a must! Superb maneuverability at slow speeds even at low speeds and designed for large loops, knife edges, and inverted flights! Just like all the planes from Dynam RC, the Dynam F4F Hellcat comes with a pre-painted finish and is an excellent representation of the real thing. The pre-installed retracts are a super great feature that really add to the scale appearance of the plane. With the PNP Hellcat you can experience the NEW retract system- now the landing gears rotate and tuck into the wings. Bonus Feature: The Dynam Hellcat F4F is flap ready. The wings have the cutouts for the servos and hinges. You will need to supply the servos and servo reverser (if your radio does not have this feature) All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying. Build time is around 45- 60 min from box to air. Expect flight time to be from 8-12 minutes, but all depends how fast you fly.
Key Features:
Specifications:
|
DY8958
$249.00
SmartDesign V3 "Trouble Free" Tail Wheel Assembly
|
Description: This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!! CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc
Features:
Pricing
Weight
Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.
|
GW-KAGC-112
$54.99
