Description:
With this Imax B6AC multi charger, you can charge using a battery at the feild or your ac plug at home! You can charge up to 6 cell batteries. It's capable of charging most types of batteries, LIFE LIPO LION (A123) NICAD NIMH ETC

If you have a splitter you can charge 2/3 cell batteries at once (using an adapter)



Specifications:

• Input Voltage: DC 11-18V / AC in: 100V-240V 50-60Hz
• Circuit power: Max Charge: 50W / Max Discharge: 5W
• Charge Current Range: 0.1-5.0A
• Discharge current range: 0.1-1.0A
• Ni-MH/NiCd cells: 1-15
• Li-ion/Poly cells: 1-6
• Pb battery voltage: 2V-20V
• Weight: 531g
• Dimensions: 134x142x36mm

Features:

• iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
• 100-240v AC input or 11-18V DC input
• Microprocessor controlled
• Delta-peak sensitivity
• Individual cell balancing
• Li-ion, LiPo and LiFe capable
• Ni-Cd and NiMH capable
• Large range of charge currents
• Store function, allows safe storage current
• Time limit function
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 5 packs in memory)
• Battery break in and cycling.

Package Contents:

• iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
• 4mm Banana Plug to Male Deans style connector
• A female Deans style connector to a pair of Alligator clips
• A female Deans style connector to a female Futaba style servo connector
• A female Deans style connector female JST style connector
• A female Deans style connector to Glow Plug type connector
• Power Cord
• User Manual

Description:

The Pulse CellMeter-8 is the latest version of battery testers - and is now available to our Redwing customers! If you want a new, easy to use, digital battery and capacity tester, your search is over. The Pulse CellMeter-8 can check the overall and individual voltage of 2 through 8 celled, LiPo / LiFe / Li-Ion batteries and 4 through 8 celled, Nicd / NiMH batteries - as well as instantly provide you with your remaining capacity. Did I mention that happens INSTANTLY? We can't make this stuff up.

This nifty little checker does more than that! The cell button allows you to balance your packs as well. So this isn't your typical bettery tester - but a balancer built in.

Features:

• High visibility LCD display screen
• Easy to use Menus
• Full instructions included
• Balance Mode
• Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries
• Instant Battery capacity graph
• Can be used as Servo tester to test standard and narrow servo.
• Port for discharge plug of NiMh/NiCd batteries
• Can be used to check the battery voltage of Lithium batteries including Lipo, LiFe, Li-Ion, as well as NiMH and NiCd batteries.
• Measure the voltage of both individual cells and full battery voltage, can also indicate the highest voltage cell, lowest voltage cell and voltage differential between cells

Specification:
Discharge Current: 1A
Balance Current: 1A
Battery Voltage Test Precision: 0.001V
Battery Type: Can test Li-Po/Li-lon/Li-Fe(2-8S),NiCd/NiMH(4-8S) battery
Servo Test Range: 1000-2000us or 500-2500us

Thrust UAV Riot 250R Pro Edition Racing Drone

Untitled Document

Description:

Bob Smith Industries Foam Cure

Foam-Cure™

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.

FOAM-CURE™ works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. FOAM-CURE™ does not, however, cure flexible enough to act as a hinge for aircraft control surfaces. Its limitations occur when bonding large areas of two non-porous materials. FOAM-CURE™ requires exposure to air for drying. If one tried to bond, for example, a half-dollar coin to glass, over 90% of the adhesive would never cure, since the solvent it contains would have no where to evaporate. A small amount of denatured alcohol can be mixed into the Foam-Cure to make it thinner.

Works Best On:

• EPP Foam
• EOP Foam
• Clear Canopy
• Paper and Crafts

Cut off tip of nozzle. Apply to one part before joining. Use tape to hold parts in place during cure. For faster curing, pull the joint apart and let Foam-Cure™ air dry for 5-10 min before rejoining the parts. This results in enough tack strength to allow the next steps of assembly. Full cure takes 10-12 hours. Foam-Cure™ works on all foams, especially on EPP and EPO, and will bond a porous surface to non-porous materials. Foam-Cure™ is also an excellent glue for clear canopies, and will also bond paper. If needed, denatured alcohol can be used to thin or clean up uncured Foam-Cure™. Replace cap after use.

Click to Download Safety Data Sheet

RCGF 30CC Twin Stinger Gas Engine 

Cross RC MC6 1/10 6x4 Military Truck Kit