SCORPION A-5524-205kv Motor for 73"-79" Airplane (12S 35-40cc)

Contact UsCustomer Reviews

SCORPION A-5524-205kv Motor for 73"-79" Airplane (12S 35-40cc)

Our Price:

$399.99


Stand Off
Cross Mount
ESC
Battery
Quantity (3)

Availability 3 in stock
Weight 5.00 lbs
SKU A-5524-205
Manufacturer Scorpion

Scorpion A-5524-205kv features

The Scorpion A - Series line of motors was designed to be the most optimal and premier choice of motor for your freestyle or UAV airplane. We have achieved incredible performance through incredible efficiency. By optimizing the magnets in the rotor, and using the best quality 0.2mm thickness silicon steel stator sheets, and 2 x single strand 1.2mm enamel coated copper wire windings rated above 200C+, the performance and efficiency results are unlike anything we have seen before! Combined with a robust design which has been tested extensively by our world class team pilots for longevity and reliability, we feel this motor checks and exceeds all measurable categories!

The A-5524-205kv was designed specifically for 73-79" Acrobatic Airplanes, or other Sport / UAV airplanes requiring up to 4600w of power. This motor is equivalent to a 35-40cc gas engine. We call it 35-40cc because with a 20" prop it is very equivalent to a 35cc gas engine and pulls less amps and therefore could run smaller batteries for lighter overall model weight. Or with a 23" prop it pulls as hard as a 40cc gas engine, with more amps thus requiring a larger battery.

Recommended Prop Selection :

20x10E/21x8E = Efficiency 

21x10E = Optimal / 35cc performance

22x10E/23x8E = High Alt 40cc Performance

Recommended ESC -: Tribunus II+ 12-80A ESC SBEC

Acrobatic Weight Range -: 5.25-9.1kg (11-20lbs)

Sport / UAV (single engine) Weight Range : - 8.07-32.3kg (17-70lbs)

A-5524 Official Promo Video


Orel Zohar - A-5524 PNP Combo - Pilot RC 73" Laser (12s)

Scorpion A-5524-205kv featuresScorpion A-5524-205kv featuresScorpion A-5524-205kv featuresScorpion A-5524-205kv featuresScorpion A-5524-205kv features

 

Full Dimension

Scorpion A-5524-205kv Full Dimension

Specifications

Motor Kv 205 RPM / Volt
Weight (Motor only) 622g (21.94 oz)
Weight (including Prop mount accessories) 655g (23.01 oz)
Motor Body Dimensions 74.0 mm x 65.8mm (2.93" x 2.60")
External Shaft Diameter 8mm
Continuous Current 80A
Continuous Power 3552 Watts
Peak Current* 105A
Peak Power* 4662 Watts
Max Rated Lipo Cell** 12s
Stator Diameter 55.0 mm (2.16 in)
Stator Thickness 24 mm (.95 in)
No. of Stator Arms 12
Magnet Poles 14
Motor Wind 9T/10T Delta
Motor Wire 2-Strand x 0.96mm
No-Load Current (IO/20V) 1.51 Amps
Motor Internal Resistance (phase-phase) 30 m?
Motor Inductance (phase-phase) @ 1khz 00µH
*Our ratings are classified as TRUTHFUL. Continuous Current / Power correlates to actual sustainable power levels. Peak Power is for intermittent full throttle usage ranging from 5 - 60 seconds depending on use case and cooling*
**Higher Cell Count possible with smaller prop usage**

Performance Charts

Scorpion A-5524-205kv Data chartScorpion A-5524-205kv Data chartScorpion A-5524-205kv Data chartScorpion A-5524-205kv Data chartScorpion A-5524-205kv Data chart

Use Case Applications

Included in the Box

1 x Scorpion A-5524 BLDC Motor
1 x A-55/65 Cross Mount (stock)
4 x M4 Cross Mount Mounting Bolts
3 x Prop Bore Spacers (8x10x 4/4/10)
3 x Female 6mm Connectors
3 x Heat Shrink
3 x Scorpion Stickers
2 x M8 Nuts

: *
: *
: *
 

DLE 35RA Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.


Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon


Specifications:

  • Displacement: 34.9 cc (2.13 cu in)
  • Bore: 1.5 in (38.5 mm)
  • Stroke: 1.17 in (35RA mm)
  • Weight: 2.6 lb (42oz)
  • RPM Range: 1,600-8,500
  • Output: 4.1 hp @ 8,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
  • Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
  • Suggested Break-in Prop: 18x6
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
  • Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller

 

 

RedwingRC Pre-Run
DLE 35ra DLE55
 

 

 

DLE-35 RA

$379.00

DLE 55cc Engine

+ Free Shipping (Continental US only!) If international customer, please contact us at [email protected] for shipping quote. You will be charged separately for shipping.

Description:
The DLE 55 is a tried and true engine in the 50cc class size. It is the best bang for the buck, and offers great reliability, power and weight ratio. Comes with all high quality components, includes all hardware (standoffs, ignition, muffler, spark plug, etc). The DLE 55cc is a perfect choice for our 50cc class airframes

Download DLE 55cc Mounting Template
Download DLE 55cc Manual

Specifications:

  • Displacement: 55.6 cc (3.392 cu in)Manifold: 4-petal, V-type, reed-valve, bottom induction
  • Bore: 1.77 in (45 mm)
  • Stroke: 1.38 X in (35 mm)
  • Weight: 3.6 lb (1.65 g)
  • RPM Range: 1,350-8,500
  • Output: 5.5 hp @ 7,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
  • Suggested Propellers: 23x8, 24x8
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weights (Individual): Engine: 47.6 oz (1,350 g); Exhaust: 3.5 oz (100 g); Ignition: 4.2 oz (120 g)
  • Recommended Propeller: Redwing 23x8, 24X8. 23x8 is a nice mix of 3d and sport. The 24x8 is more 3d

Features:

 

 

 

  • Two crankshaft bearings-simple design for lighter weight
  • Aluminum alloy crankcase
  • Four petal V-type reed valve bottom induction system
  • Walbro carburetor
  • Fully automatic electronic ignition
  • Two year limited warranty through Hobby Services beginning at date of purchase
  • INCLUDES: Engine, spark plug, standoffs, ignition, muffler, instruction manual

DLE-55

$399.99

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

 


 

Features:

 

  • Extremely Reliable
  • Mechanically Efficient Design
  • Simple and Solid Construction
  • Fewer parts needed for install
  • Ball Bearings

 

Pricing

 

  • 20-40cc: $27.00
  • 50-70cc: $34.99
  • 85-120cc: $44.99
  • 150cc-220cc: $54.00

 

 

Weight

 

 

  • 20-40cc: 1.2 oz
  • 50-70cc: 1.6 oz
  • 85-120cc: 2.2 oz
  • 150cc-220cc: 2.6 oz

Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.

Tail Wheel Chart

GW-KAGC-112

$54.99