HiTec DB778WP, Ultra-Torque, Brushless, Low Profile, HV Waterproof Servo 20.4kg/283.6oz [email protected]

Contact UsCustomer Reviews

HiTec DB778WP, Ultra-Torque, Brushless, Low Profile, HV Waterproof Servo 20.4kg/283.6oz [email protected]

Our Price:

$139.99


Quantity (15)

Availability 15 in stock
Weight 0.38 lbs
SKU HRC36788S
Manufacturer Hitec

The Hitec DB778WP 32-Bit MCU Low Profile Ultra Torque Waterproof Servo is a high-performance, low profile DB778WP. Manufactured with exclusive “hitecnology” industrial servo innovation, the DB778WP’s design and premium-quality construction was built for demanding commercial applications, yet its superior torque also makes it the perfect hobby servo for 1/10th 2WD & 4WD off-road buggies and touring cars. Engineered with an ultra-efficient brushless motor, high-resolution digital circuit, hardened steel gears and an all-aluminum, IP-67 rated waterproof case, the DB778WP excels when pushed to the limits on ultra-high bite carpet or clay tracks. Take on the competition and drive hard, knowing you are backed by Hitec’s 2-year warranty which affords you the added protection you deserve! Invest in the best with Hitec!

Features:

  • Voltage Range is 3.7V - 8.4V
  • Ultra-Efficient Brushless Motor
  • Hardened Steel Gears
  • All Aluminum Case
  • IP-67 Waterproof Rated
  • High Response, High Resolution Circuitry
  • 32-Bit MCU Technology / 4096 Resolution
  • Smart Sense Technology for Servo Analytics
  • Full Programmability with DPC11 or HFP-30 (sold separately)
  • H25T Industry Standard Output Spline

Specifications:

  • Operating Voltage Range (Volts DC): 3.7V ~ 8.4V
  • Speed (Second @ 60°): 0.08 @ 8.4V
  • Maximum Torque Range: 283.56 oz. / in. @ 8.4V (20.41 kg.cm @ 8.4V)
  • Current Draw at Idle: 28mA @ 7.4V
  • No Load Operating Current Draw: 600mA @ 7.4V
  • Stall Current Draw: 5,500mA @ 7.4V
  • Dead Band Width: 1usec
  • Dimensions: 41.0 x 21.0 x 26.5mm 
  • Weight: 68.0g
  • Circuit Type: 32bit Programable Digital
  • Motor Type: Brushless
  • Gear Material: 5 Steel Gears
  • Output Shaft (type / Ømm): H25T
  • Case Material:  Aluminum
  • Dust / Water Resistance: IP-67 Rated
  • Connector Gauge (AWG) / Strand Count: 20AWG


Limited Warranty:
Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product.

: *
: *
: *
 

Super Cat 700BL Brushless RTR Catamaran Boat

RGRB1208 

RGRB1207

$249.99

Standoff (25mm) 100-120CC (Anodized Gas Engine 25mm Stand Off Mounting Kit w/6mm Nuts & Bolts- 4pcs)

Standoff (25mm) 100-120CC (Anodized Gas Engine 25m Stand Off Mounting Kit w/6mm Nuts & Bolts- 4pcs) 

High Quality 1" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

 

KAG0228

$24.99

Drill Jig Small (DLE 30/35RA/40/55/55RA/60/61/65, DA 50-55)

Drill Jig Small (DLE 30/35RA/40/55/55RA/60/61/65, DA 50-55)
This Drill Jig is a high quality heavy steel jig that can be used to perfectly drill your props and spinners for the DLE 30cc, DLE 35RA, DLE55, DLE55RA, DA, DL, DLA, 50cc, MLD 28cc, and EVO 54cc

Simply slide the prop or spinner onto the guide and tighten down the bolt to secure it and drill out the holes using the included drill bits!

Kosta-Small Drill Jig1

$21.99