GliderCG Scale Standard (Center of Gravity (CG) digital balance device, Designed for Large Models up to 88 lbs (40 kg)
GliderCG Scale Standard- Center of Gravity (CG) digital balance device, Designed for Large Models up to 88 lbs (40 kg) GliderCG Scale is our largest CoG balancer for models ranging from 7oz to 88lbs with wingspans up to 26'. The GliderCG Scale is suited for much larger planes that the smaller GliderCG products are unable to measure - models weighing up to 88lbs with giant wingspans. Designed for stability the scale uses larger and stronger supports with a robust base and frame to accomadate the Giant Scale Models. Additionally, the scale is versatile and is able to measure much smaller models at 17oz or less. GliderCG Scale features a sensor in each of the four legs, thus providing very accurate results for CG and lateral measurements. By using four sensors, we eliminate the torsional stress of the planes to obtain stable values while the plane is placed on the GliderCG Scale. Additionally, the GliderCG Scale can calculate the CG of the model in the lateral axis, providing additional information for balancing purposes.
With a solid and sturdy, yet lightweight aluminum structure, the GliderCG Scale is built to fit almost any model.
DOCUMENTATION $20 Flat Rate Shipping for USA only. Contact us at [email protected] to calculate international shipping cost. Shipped directly from Europe to the customer. However, for customers with a USA shipping address, there will be about a 15% tariff paid directly to the shipper (e.g. UPS): About $89.85 tariff. GliderCG Scale Std - Direct Factory Ship: May take 2-6 weeks to arrive. Plus $89.85 tariff for addresses in the USA to be paid by customer directly to shipper. |
Carbon Fiber Landing Gear (30cc-120cc sizes) Angled and Curved Style
| Available in styles for
Carbon Fiber Landing Gear Extra 300 Series For 26-30cc, 50-80cc and 100-120cc Dimensions (match the below information to the inset photo)
|
SS-CF-LG
$39.99
30cc Slick Replacement Cowl
| Replacement cowls for our 30cc Slick 540! Just like the plane, these cowls are available in 2 color schemes. It's back and better than ever! The RedwingRC 30cc Slick 540 is suited for both extreme 3D and traditional aerobatic/sport flight. Showing both smooth lines and awesome performance, the Slick 540 does most of your typical maneuvers very well: clean knife edge passes, exceptionally smooth rolling harriers, and clean snap maneuvers aided by its designed weight distribution. Click Here to see the 30cc Slick 540
|
CW-FW-SLK
$39.99
Zap CA Glue 4oz and 2oz
|
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PAAPT-06
$12.99
