GT-Cygnus F3L and F5L RES 1970mm ARF (F3/F5-RES Competition Pure Glider or Electric Motor)
GT-Cygnus F3L & F5L RES 1970mm ARF (Pure Glider and Electric Motor Glider) The Cygnus F3L (Pure Glider) and F5L (Electric Powered) RES (Rudder/Elevator/Spoiler) gliders comply with the international and US regulations for the F3L and F5L competition classes. F3L/F5L is a group scored thermal duration contest for low tech 2 meter span RES (Rudder/Elevator/Spoiler) gliders. Cygnus F3L ARF is a fully built pure glider ARF model with multicolored coverings where you only have to install the 3 servos (e.g. BDualsky DS169), a 2S 600mAh lipo and the receiver. Everything else has already been taken care of by the manufacturer. Cygnus F5L ARF is a fully built electric powered ARF model with multicolored coverings where you only have to install the 3 servos, Motor, ESC and a 2S or 3S 600mAh lipo and the receiver. Everything else has already been taken care of by the manufacturer. The two colored ironed ribbed wings with a double V shape are in 3 parts, the outer ears are attached with GRP connectors and secured with tape, the anti-twist protection is pins. There is a large brake flap (spoiler) with magnet in the middle section for precise landings and safe exit from thermals. The front fuselage is made of balsa wood and the tailplane is made of CFRP. The large side cabin lid with magnetic closure provides generous access and installation space for servos, receivers and batteries. The built-in high start hook is adjustable. The wing is screwed on from above with 2 screws. The elevator and rudder are weight-optimized, built in a conventional ribbed design and finished with ironing. The elevator is removable and is screwed on, the rudder is firmly glued. The rudder and elevator linkage is done with cables and spring return. Specs:
Flat Rate shipping $20 for lower 48 USA only. Contact [email protected] to calculate international shipping cost. |
Cygnus F5L
Puretronics Contact Cleaner
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
TAE3500
$12.99
FUTABA BLS173SV S.Bus Brushless High Voltage Mini Aircraft Servo .10sec/105.6oz @ 7.4V
FUTABA BLS173SV S.Bus Brushless High Voltage Mini Aircraft Servo .10sec/105.6oz @ 7.4V |
HRP-FUT01102172-1
$134.99
PULSE 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery
PULSE 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery
Description:Pulse Lithium Polymer Batteries - Setting a New Standard. As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored. Pulse Batteries Available Individually or in a PRE-MADE System!Take the guesswork out of your electric battery set up- we've done it for you! Check out the suggested set up systems for 30cc and 50cc. LiPo 4500mah 5S, 18.5v - $104.99 each 30cc 10S System: Two (2) LiPo 4500mah 5S, 18.5v - $208
30cc 12S System #1: Two (2) LiPo 3300mah 45C 6S, 22.2v - $188
30cc 12S System #2: Two (2) LiPo 3700mah 45C 6S, 22.2v - $218
30cc 12S System #3: Two (2) LiPo 4100mah 45C 6S, 22.2v - $238
50cc 12S System #1: Two (2) LiPo 5000mah 45C 6S, 22.2v - $278
50cc 12S System #2: Two (2) LiPo 5500mah 45C 6S, 22.2v - $298
50cc 12S System #3: Two (2) LiPo 6000mah 35C 6S, 22.2v - $298
Purchase pre-made system or buy individually! Select below.
|
PLUTX-2550-3S
$27.99