HiTec D145SW 32 Bit, Wide Voltage, Steel Servo .14/83oz @ 7.4V (Slim Wing Servo)

Contact UsCustomer Reviews

HiTec D145SW 32 Bit, Wide Voltage, Steel Servo .14/83oz @ 7.4V (Slim Wing Servo)

Market Price: $98.95
Our Price:

$65.99


You Save

33%

Quantity (6)

Availability 6 in stock
Weight 0.38 lbs
SKU HRC36145S
Manufacturer Hitec

D145SW 32 Bit, Wide Voltage, Steel Servo .14/83oz @ 7.4V

With 32-bit high resolution, ultra-response technology and wide voltage operation, the slim wing D145SW has heavy-duty, steel gears, providing instant torque and holding power for slim aircraft and glider wings.

Performance Specifications

  • Operating Voltage Range (Volts DC) 4.8V ~ 7.4V
  • Speed (Second @ 60 degrees) 0.21 ~ 0.14
  • Maximum Torque Range oz. / in. 54 ~ 83
  • Maximum Torque Range kg. / cm. 3.9 ~ 6.0
  • Current Draw at Idle 30 mA
  • No Load Operating Current Draw 180 mA
  • Stall Current Draw 2,500mA

Physical Specifications

  • Dimensions (Inches) 1.18 x 0.39 x 1.45
  • Dimensions (Metric) 30.0 x 10.0 x 37.0
  • Weight (Ounces) 0.84
  • Weight (Gram) 24.0
  • Circuit Type 32bit Programable DigitalMotor Type 3 Pole Cored Carbon Brush
  • Gear Material MP 1st Gear & 4 Metal Gears
  • Bearing Type Dual Ball Bearing
  • Output Shaft 23
  • Case Material Plastic
: *
: *
: *
 

Falcon Carbon Fiber Props

 

Description:

We are proud to be an official retailer for Falcon© Brand Carbon Fiber Props. These high quality props are the real deal- a lightweight and durable wood prop wrapped in carbon fiber weave for extra strength.




Features:

  • Scimitar design for efficiency
  • Sharp tips - thin blades for better performance
  • Made of high quality 3K carbon fiber weave
  • Lightweight for quick spool up
  • Created from high quality European steel molds
  • Pre balanced at the factory (final fine tuning recommended)
  • Beautiful looks, strength and performance


*Falcon Hats are currently out of stock

Falcon Prop Test Chart

FLC-

$56.00

Bob Smith Industries Maxi-Cure Exra Thick CA

Untitled Document

Description:

Bob Smith Industries CA Glue

Maxi-Cure™ Super Glue, CA

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars.

Directions:

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.

 

Works Best On:

  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Rubber
  • Laminating
  • Reinforcing

Works Good On:

  • Balsa Wood
  • Water-Resistant

 

Click to Download Safety Data Sheet

BSI-CA-56b908cabf5a5

$4.99

Little Wing, Cool Kite

Little Wing, Spectrum Kite

HRP-SKK20416

$48.99