SCORPION A-7441-165kv (V2) Motor for Giant Scale Airplane (12S 100-120cc)

Contact UsCustomer Reviews

SCORPION A-7441-165kv (V2) Motor for Giant Scale Airplane (12S 100-120cc)

Our Price:

$959.99


Stand Off
Cross Mount
ESC
Battery
Quantity (2)

Availability 2 in stock
Weight 5.00 lbs
SKU A-7441-165kv (V2)
Manufacturer Scorpion

The Scorpion A - Series line of motors was designed to be the most optimal and premier choice of motor for your freestyle or UAV airplane. We have achieved incredible performance through incredible efficiency. By optimizing the magnets in the rotor, and using the best quality 0.2mm thickness silicon steel stator sheets, and single strand enamel coated copper wire windings rated above 200C+, the performance and efficiency results are unlike anything we have seen before! Combined with a robust design which has been tested extensively by our world class team pilots for longevity and reliability, we feel this motor checks and exceeds all measurable categories!

The A-7441 was designed specifically for airplanes requiring a 100cc - 126cc equivalent gas engine, or other airframes requiring up to 9,300w of power.

Recommended Prop Selection :

  • 12s Lipo - 28x13E, 29x12E, 30x12E
  • 14s Lipo - 27x12E, 28x10E

Recommended ESC: Scorpion Tribunus III 14-220A ESC SBEC

NOTE: Due to the large size of airframes in this class, normally the battery wires must be extended. Running to long of battery cables WILL damage ESC and void your warranty. Precautions must be taken. We recommend the use of the Scorpion 1880uF Capacitor / PDB Board

 Tutorial / WARNING about using ESC's with a Power Supply, or Long Battery Cables

NOTE: Due to the large size of airframes in this class, attaining proper ESC cooling can be difficult. The ESC MUST have direct access to airflow using baffles directing air directly to the ESC. Simply adding a hole in the cowl is not suitable, and air must be carried directly to the ESC via baffling.

Acrobatic Weight Range -: 11.80kg - 27.21kg (26.0lbs - 60.0lbs)

Sport / UAV (single engine) Weight Range : - 18.67kg - 56.80 kg (41.7lbs -125.2lbs)

Scorpion A-7441-180kv - Santiago Perez

Specifications

Motor Kv 180 RPM / Volt
Weight (Motor only) 1599g (56.40 oz)
Weight (including mount + Prop mount accessories) 1806.8g (63.73 oz)
Motor Body Dimensions 86.80mm x 81.90mm (+20.0mm prop hub) (3.42" x 3.22" (+0.79 prop hub))
External Shaft Diameter 10mm
Continuous Current 120A
Continuous Power 6260 Watts
Peak Current* 178A
Peak Power* 9300 Watts
Max Rated Lipo Cell** 12s - 14s
Stator Diameter 74.0 mm (2.91 in)
Stator Thickness 41.6 mm (1.64 in)
No. of Stator Arms 24
Magnet Poles 28
Motor Wind 5T 4Y
Motor Wire 1.35 mm
No-Load Current (IO/15V) 3.49 Amps
*Our ratings are classified as TRUTHFUL. Continuous Current / Power correlates to actual sustainable power levels. Peak Power is for intermittent full throttle usage ranging from 5 - 60 seconds depending on use case and cooling*
**Higher Cell Count possible with smaller prop usage**

Scorpion A-7441-180kv (V2) featuresScorpion A-7441-180kv (V2) featuresScorpion A-7441-180kv (V2) featuresScorpion A-7441-180kv (V2) featuresScorpion A-7441-180kv (V2) featuresScorpion A-7441-180kv (V2) features



: *
: *
: *
 

Savox SV-1232 MG Coreless Digital HV Servo

Description:

 

SAV-SV1232MG

$79.99

Sport Cub 500 4Ch Trainer w/ 6-Axis Gyro/ One-key Aerobatic Park flyer RTF

Sport Cub 500 4Ch Trainer w/ 6-Axis Gyro/ One-key Aerobatic Park flyer RTF

SuperCub-761-4

$119.99

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and MOLEX 1.25MM CONNECTOR PACKAGE

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and MOLEX 1.25MM CONNECTOR PACKAGE 

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0070M1

$48.00