Cessna-188 Scale Crop Duster 4S STOL V2 1500mm (59") with Tundra Rubber Wheels- Red
| RedwingRC Plug-and-Play aircraft! The Dynam RC C188 can handle low speeds and altitude like a champ! The design of the C-188 has been perfected to give you the most enjoyable flight experience and control. Plus there is factory installed flaps!!! This is a great plane to learn on and a great chance to get used to a low-wing aircraft. All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying, extend the flaps on landing for a perfect touchdown in any surface due to the fixed landing gear. Build time is around 45- 60 min from box to air. Expect flight time to be from 8-15 minutes, just depends on how fast you fly.
Dynam Cessna 188 Crop Duster V2 4S 1.5m w/ Flaps Upgraded Details:
This Dynam Cessna 188 Crop Duster Red 1500mm 59" STOL RC Scale Plane is perfect for all intermediate pilots wanting to try their skills on their first low-wing monoplane, as it is also made from a durable, damage-resistant EPO foam which is light and easy to repair. Dynam Cessna 188 Crop Duster Orange is finished with a high-contrast orange, black, and white paint scheme. This remote-controlled aircraft is relaxing to fly and will put a smile on any pilot's face! Now available in SRTF version which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle. SRTF-6C Version: Includes a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-6C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter SRTF-8C Version: Features a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-8C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter. Select PNP or SRTF ver in the drop down above What is required (PNP):
Key Features:
Specifications:
$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.
|
Enduro 1/10 Scale Trail Truck, Trailwalker 4x4 RTR
| Enduro 1/10 Scale Trail Truck, Trailwalker 4x4 RTR |
ASC40101
$299.99
Vorza Flux Truggy, 1/8 Scale 4WD RTR Brushless w/2.4GHz Radio System, Red
| Vorza Flux Truggy, 1/8 Scale 4WD RTR Brushless w/2.4GHz Radio System, Red |
HPI160181
$524.99
Racers Edge Heavy Duty Aluminum Large Clamping Servo Arm 15T (Savox Large Scale and 15T Servos only)
| Racers Edge Heavy Duty Aluminum Large Clamping Servo Arm 15T (Savox Large Scale and 15T Servos only) 25T spine for Blue Bird, Savox, Futaba and power HD servos
Description:Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea). There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything! The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced. All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting. New and Improved Technology!The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life. "What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you. So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!
Specs:
|
servo-arm-RCE10221SAV
$7.99
