Tamiya 1/14 RC Mercedes Benz Arocs 4151 8x4 Tipper Truck Kit

Contact UsCustomer Reviews

Tamiya 1/14 RC Mercedes Benz Arocs 4151 8x4 Tipper Truck Kit

Market Price: $1240.00
Our Price:

$868.00

You Save

30%

Quantity (1)

Availability 1 in stock
Weight 10.00 lbs
SKU TAM56366

Tamiya 1/14 RC Mercedes Benz Arocs 4151 8x4 Tipper Truck Kit

This is a highly accurate 1/14 scale radio control model that recreates the Mercedes-Benz Arocs dump truck in the 8x4 configuration. It features a highly realistic truck bed section behind the cab which can be operated by the radio transmitter, using the separately-sold Actuator Set (Item 56545)!

The model's ladder frame chassis features aluminum side channels with resin cross members and is equipped with a highly realistic suspension utilizing metal leaf springs and friction shock-dampers. A front-mounted motor and 3-speed transmission power the two rear wheel axles, which are fitted with built-in differentials to enable smooth cornering. A separately sold 4-channel R/C system and multi-function unit allow you to drive the vehicle and experience realistic lights, sounds and vibrations. (Both sold separately)

Requires:
Tamiya Attack 4-channel radio, steering servo, ESC, 7.2volt battery & battery charger, and Tamiya TS spray paint.

Features:

  • The Arocs 4151 form is recreated with an injection molded body, including depictions of cab rails, intake duct and other details. Separate parts recreate side mirrors and visor, etc.
  • Both front axles are steered, via a single servo. Wheels turn realistically at slightly different angles.
  • Features a truck bed section comprised of metal subframe for superb durability.
  • Install the separately sold Actuator Set (Item 56545) for realistic truck bed motion.
  • TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the truck bed.
  • The battery case is located over the second axle, which allows access even when there are loads in the bed.
  • The roof features a depiction of light pods on the visor, which can be fitted with LEDs for a realistic finish.
  • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.
  • Metal leaf spring dampers with built-in coil springs provide durable suspension.
  • Use with separately-sold MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.
  • 1/14 scale R/C model assembly kit. Length: 667mm, Width: 196mm, height: 268mm.
: *
: *
: *
 

SALE

PT-17 Stearman 1600mm Balsa ARF or ARF with Power Pack (Now 2 color schemes Blue or White Fuse!)

Dancing Wings PT-17 Stearman 1600mm Balsa ARF

Pre-order sale $100 off! Estimated Arrival late Feb

  • This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive one from the first shipment.
  • Only the Navy Blue and Gold or Military Gray and Coast Guard scheme is available for this first shipment. If you want one of the other schemes email [email protected] so we can special order it.

Pre-order today to reserve your model at this special introductory price, Credit Card or other payment will be charged at the time of order.

Dancing Wings PT-17 Stearman 1600mm Balsa Kit --available as ARF or ARF with Power Pack

The Stearman Model 75 is a biplane formerly used as a military trainer aircraft, of which at least 10,626 were built in the United States during the 1930s and 1940s. Stearman Aircraft became a subsidiary of Boeing in 1934. 

Kit Versions:

  • ARF PT-17 Stearman Balsa airplane,Kit (no electronics)
  • ARF with Power Pack (Motor 4220 410KV+80A ESC+15 wood prop+Servo 37g*4 (For Electric 6S)

What is required:

  • 6-Channel or above transmitter
  • 6-Channel receiver
  • 6S 22.2V, 5000mAh EC5 connector, 45C Li-Po battery and charger
  • 1 hour assembly time

Specifications:

  • Material: Balsa Wood
  • Wing Span: 1600mm(63 in)
  • Flying Weight: ~1300g
  • Wing Loading: 
  • Fuselage Length: 1350mm (53 in)
  • Motor: 3520-580KV Equivalent Brushless Motor
  • ESC: 80A ESC
  • Propeller: 15x7
  • Servo: 4x 37g for Electric or 5x 37g for Gas
  • Elevator: Yes
  • Rudder: Yes
  • Ailerons: Yes
  • Flaps: No
  • Landing Gear: Fixed

DW-PT-17-SCG35

$489.00

Venom DRIVE 25C 2S 5000mAh 7.4V Graphene LiPo Hardcase Battery w/ UNI Plugs

Venom DRIVE 25C 2S 5000mAh 7.4V Graphene LiPo Hardcase Battery w/ UNI Plugs

VNR15192-RW

$49.99

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & VOLTAGE PROBE (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & VOLTAGE PROBE (DSMX/DSM2 COMPATIBLE)

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0086VP

$35.99