LiPo Guard Charging Bag

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

• Type: LiFe Battery (same technology as A123)
• Weight:
  • 1450mah - 2.8oz,
  • 2100mah - 4oz,
  • 3100mah Life - 5.5oz
• Size:
  • 1450mah- 15mm x 34mm x 87mm,
  • 2100mah- 12mm x 50mm x 106mm,
  • 3000mah- 130mm x 45mm x 15m
• Voltage: 6.6Volts
• Discharge rate:
  • 20c maximum continuous
  • 40c maximum burst
• 2 cells (2s)
• 14gauge Wire
• Connectors: Two Options!
  • T Connector (T connector that fit a standard Dean)
  • XT-60 Connector. Choose Below
• Also a balancing lead

Be sure to select the XT connector if purchasing for use with our Power Box PRO's. Please select connector type: Deans or XT.
 

• 1450mah - $15.99
• 2100mah - $25.99
• 3000mah - $39.99
   

High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
 

• Soft flexible silicone casing
• Heavy duty 22awg
• Universal - XQ Power/Hitec/Power HD/JR/more...
• Reliable! We've NEVER gotten a pair returned
  
  Prices
  • 2" 1 pair - $2.50
  • 2" 2 pair - $4.50
  • 2" 3 pair - $6.99
     
  • 3" 1 pair - $3.50
  • 3" 2 pair - $6.50
  • 3" 3 pair - $8.99
     
  • 6" 1 pair - $3.99
  • 6" 2 pair - $6.99
  • 6" 3 pair - $9.99
     
  • 8" 1 pair - $3.99
  • 8" 2 pair - $6.99
  • 8" 3 pair - $9.99
     
  • 10" 1 pair - $3.99
  • 10" 2 pair - $6.99
  • 10" 3 pair - $9.99
     
  • 12" 1 pair - $4.99
  • 12" 2 pair - $8.99
  • 12" 3 pair - $12.99
     
  • 14" 1 pair - $4.99
  • 14" 2 pair - $8.99
  • 14" 3 pair - $12.99
     
  • 16" 1 pair - $4.99
  • 16" 2 pair - $8.99
  • 16" 3 pair - $12.99
     
  • 18" 1 pair - $6.99
  • 18" 2 pair - $10.99
  • 18" 3 pair - $13.99
    
    
  • 24" 1 pair - $7.99
  • 24" 2 pair - $12.99
  • 24" 3 pair - $15.99
     
  • 28" 1 pair - $7.99
  • 28" 2 pair - $12.99
  • 28" 3 pair - $15.99
     
  • 32" 1 pair - $7.99
  • 32" 2 pair - $12.99
  • 32" 3 pair - $15.99
     
  • 36" 1 pair - $8.99
  • 36" 2 pair - $14.99
  • 36" 3 pair - $17.99
    
    
  • 44" 1 pair - $8.99
  • 44" 2 pair - $14.99
  • 44" 3 pair - $17.99
     
  • 48" 1 pair - $8.99
  • 48" 2 pair - $14.99
  • 48" 3 pair - $17.99
     

Bob Smith Industries 301 Extender Tips for CA Glue Bottles (6 Pack)

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.

Works Best On:

• All Cyanoacrylates

Avaliable in 1 oz Size.

Click to Download Safety Data Sheet