GeeBee Y V2 Sport 3D Aerobatic 1300mm (50")

RedwingRC Plug-and-Play aircraft!

The Gee Bee series, crafted by Granville Brothers Aircraft in the early 1930s, comprises high-performance racing planes celebrated for their distinctive design and remarkable flying prowess.

The Dynam GeeBee looks as neat and flies as well as the original GeeBee. Like all Dynam airplanes, this is made with damage resistant EPO foam. The red and white color scheme makes it very visible in the sky. Like all Plug and Play airplanes, the motor, servos, speed controller are factory tested and installed. The Dynam Gee Bee Y V2 Sport 3D Aerobatic 4S RC Plane with a wingspan of 1300mm is designed for thrilling aerobatics and agile maneuvers. With its eye-catching design and sporty aesthetic, it's sure to turn heads at the flying field.

Videos:

GeeBee V2 Sport 3D Aerobatic 4S

Dynam Gee Bee Y V2 Sport 3D 4S 1.3m Upgraded Details:

• Rear-Mounted Servos
  Shortens the pushrod length, reducing response lag and improving control precision.
• Detachable Wings
  Simplifies transportation and storage, making it more convenient to carry.
  Enables easier maintenance and quicker wing replacement.
• No-Glue Vertical and Horizontal Stabilizers (Screw-On Installation)
  Streamlines assembly and disassembly, enhancing convenience and durability.
• Powerful BM3720-KV900 Brushless Motor
  Provides a thrust of up to 2.8kg, delivering exceptional power for vertical climbs and high-G maneuvers.
  Offers robust power reserves to handle more complex flying conditions and advanced aerobatics.
• Upgraded ESC (Skylord-50A 5A BEC)
  Ensures efficient and stable current management, allowing the motor and servos to operate smoothly.
  Features a built-in 5A BEC, providing consistent power to the electronics and reducing the risk of failure.
• 4S 14.8V 2200mAh 20C Battery
  Delivers higher power output, extending flight time and improving overall performance.
  Compatible with the high-power system, ensuring sustained high-performance operation.
• Spacious Battery Compartment with Wooden Padding
  Reinforced with wooden layers to enhance durability and prevent deformation over extended use.
• Ball-Link Pushrods
  Reduces play in the pushrod system, providing precise and reliable control of control surfaces.
  Offers enhanced durability, minimizing wear over time.
• Enhanced battery cover with a pin latch.

Powered by a 4S setup, this 3D rc plane delivers impressive performance and agility in the air. Whether you're performing loops, rolls, or inverted flight, the Dynam Gee Bee Y V2 is up for the challenge.

Constructed with lightweight yet durable EPO materials, this GEE BEE Y plane is built to withstand the demands of aerobatic flying. With precise control and responsive handling, pilots can push the limits of their skills with confidence.

Equipped with powerful Detrum BM3720-KV900 brushless outrunner motor, TomCat Skylord-50A ESC and 4x 9g servos, the Dynam Gee Bee Y V2 offers exceptional maneuverability and control. The fixed landing gear adds convenience for takeoff and landing.

6CH 2.4Ghz MSR66A (iStone 6-Axis Gyro Stabilizer w/ ABS System).

Get ready to experience the excitement of aerobatic flying with the Dynam Gee Bee Y V2 Sport 3D Aerobatic RC Plane.

Features

• Durable and lightweight EPO construction
• Aileron, rudder, and elevator controls
• Detrum BM3720-KV900 brushless outrunner motor
• TomCat Skylord-50A ESC
• 2-blade propeller 12*6
• 4x 9g micro servos
• 6CH 2.4GHz radio system
• 6CH 2.4Ghz MSR66A (iStone 6-Axis Gyro Stabilizer w/ ABS System)
• 4S 14.8V 2200mAh Li-Po 20C battery w/ XT60 Connector
• Comes with a decal set
• Suitable for intermediate or experienced pilots

Specifications

• Wingspan: 1270mm (50in)
• Overall Length: 980mm (38.58in)
• Flying Weight: 1250g (44.09oz)
• Wing Loading: 42.2g/dm²
• CG (Center of Gravity): 58-62mm from the leading edge of the wing at the root
• Power System: Detrum BM3720-KV900 brushless outrunner motor - (pre-installed)
• Electronic Speed Control: TomCat Skylord-50A ESC - (pre-installed)
• Propeller: 2-blade propeller 12*6
• Servo: 4x 9g micro servos - (pre-installed)
• Landing Gear: Fixed
• Required Transmitter: 6CH+ 2.4Ghz 6-Channel or above
• Required Receiver: 6CH 2.4Ghz MSR66A (iStone 6-Axis Gyro Stabilizer w/ ABS System)
• Required Battery: 4S 14.8V 2200mAh Li-Po 20C w/ XT60 Connector
• Aileron: Yes
• Elevator: Yes
• Rudder: Yes
• Flaps: No
• Approx. Flying Time: 7 minutes
• Material: EPO Foam
• Skill Level: Intermediate
• Assembly Time: 1 hour
• Age Level: 14+
• Recommended Environment: Outdoor
• Aircraft Type: Aerobatic

What's the difference between RTF, BNF, and PNP?

PNP (Plug-N-Play) RC airplanes have everything you need EXCEPT a transmitter, receiver, and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, and servos.

BNF (Bind-N-Fly) RC airplanes come with everything you need to get in the air EXCEPT the Transmitter and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, and an iStone gyro receiver. They are easy to use, versatile, and safe, making them the perfect choice for beginners and experienced pilots. The BNF (Bind and Fly) version, receivers such as the MSR66A work exclusively with Detrum transmitters.

Dynam SRTF version is based on the standard RTF (Ready to Fly), which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.

SRTF-6C Version: Includes a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-6C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-8C Version: Features a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-8C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-DT9 Version: Comes with a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Blitz-DT9 transmitter (programming & telemetry), SR86A-G 8-channel gyro receiver, battery, charger, and adapter.

iStone Gyro Receiver (The receiver integrated with iStone stabilizer):

• Six-axis gyro high-precision stabilization function, auto-recovery, one-click rescue. Incredibly accurate and greatly improves the flying experience.
• Regarding different aircraft, the parameter and sensitivity of the gyro receiver can be programmed with a Detrum transmitter (Gavin6C/Gavin8C/Blitz DT9) directly.
• Quick and easy setup process. If you don't want Gyro to join the flight, just choose Gyro off mode on Transmitter.

$20 Flat Shipping US only--contact us at [email protected] to calculate international shipping cost