BLS-A932+ SLIM WING, HV MINI, DIGITAL, HIGH TORQUE/SPEED, METAL GEAR, BRUSHLESS (New Generation) 19.8kg/275oz, 0.07 @8.4V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

• Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
• 4096 Resolution
• Improved Latency (Dual Processor 7ms Frame Rate)
• Vibration Mode
• Included Touch Screen Stylus
• Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
• Customizable Menu
• One-Stop Model Type Setting
• 3 Multi-Tasking Digital Trims
• Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
• Ultra-Smooth Quad Ball Bearing Gimbals
• Full-Size Comfortable Hand Grips (Top Quality Elastomer)
• Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
• Easy Gimbal Mode Change and Tension Adjustment (Hardware)
• Power Management System (Adjustable Backlight & Auto Shut-off Time)
• Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)


 

Standard Programming

• 9 Assignable Control Channels
• 3-Model Type Programming (ACRO/GLID/HELI)
• 30-Model Memory
• 20 Character Model Naming
• 8 Flight Conditions with 10 Characters
• Fail-Safe
• Channel Function
• EPA
• Dual Rate & EXP* 
• Sub-Trim
• Servo Reverse
• Servo Speed (up to 25 sec. in each direction)* 
• Servo Monitor (Monitor & Servo Test)
• 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
• Trainer
• Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

Standoff (25mm) 100-120CC (Anodized Gas Engine 25m Stand Off Mounting Kit w/6mm Nuts & Bolts- 4pcs) 

High Quality 1" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

 

GliderCG Throw Meter and Wing Incidence Tool (Multi-Purpose Digital Angle Throw Meter, and can measure the dihedral angle of a wing, measure incidence angles, etc.) 

Here is a video demonstrating GliderThrow in use.

GliderCG Standard V3 (Center of Gravity (CG) digital balance device, Designed for F5J, F3B, and F3F Gliders, Works on all RC model airplanes!)

Based on the original development of Olav Kalhovd, GliderCG is a center of gravity (CG) digital balance device for RC planes able to provide the exact information of where the CG is located on the aircraft via a display which also provides information of the aircrafts's total weight.

Simply place the aircraft/sailplane on the scale and obtain it's CG without trying to balance it on your fingers or mark the wings to supporting them on precarious structures.

Once the aircraft/sailplane is placed on the scale, you can vary the CG by moving e.g. the battery and GliderCG will automatically inform you of the new CG in real-time.  Easy and simple!

The GliderCG family was born with the aim of being able to transfer the concept of digital measurement of the CG to the different types of aircraft and radio control gliders. For this reason there is a specific device for each of the different popular disciplines: GliderCG F3K/DLG, GliderCG Standard, GliderCG Plus and GliderCG Scale. There is a device that will work on all RC aircraft.

GliderCG is constantly being improved and has evolved over time to provide more features and enhancements. Today's GliderCG devices are much more modern and advanced than the initial ones produced in 2018.

Based in the GliderCG v2 platform and with the constant desire for improvement, development on all aspects of the device, both hardware and software, to offer an improved device in a compact form factor for easy transport and storage when not in use.

This model is designed for F5J, F3B, and F3F models however will work on all RC model airplanes meeting the weight and dimension limits below listed in specifications.

FEATURES

• Folding arms with solid locking mechanism
• Battery level indicator (WiFi Interface)
• Sliding lid access to the battery compartment
• Greater stability
• WiFi + OLED LCD display

Additionally, this unit provides the ability to view data through the WiFi connection. The WiFi connection also provides the option to save the CG configuration of different models to review historical readings and the ability to compare readings after e.g. repairs, etc.

GliderCG Standard v3 includes a set of smaller wing adapters to allow the measurement of planes with a narrow wing chord (i.e. DLG/F3K models).

SPECIFICATIONS

• Maximum weight: 17.6 lbs / 8 kg
• Maximum fuselage width: 3.4 in
• Maximum fuselage height (from bottom fuselage to wing bottom): 3.4 in / 86 mm
• Leading edge to rear support pad distance: 5.9 in / 150 mm
• Power: 9V DC (6LR61)

DOCUMENTATION

• GliderCG Standard v3 Manual (PDF)

FREE Shipping for USA only. Contact us at [email protected] to calculate international shipping cost.