GT Power High Power 3W Aircraft Lighting System

Contact UsCustomer Reviews
  0  
  4. GT Power High Power 3W Aircraft Lighting System
Tariff Information update
The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.
more offers

GT Power High Power 3W Aircraft Lighting System

Ask a question about this product
Printable version

Share

Options

Market Price: $49.99
Our Price:

$35.99
You Save

28%
Quantity

OUT OF STOCK

Details

Availability No items available
Weight 0.10 lbs
SKU GT-HP3W-Light-SYST

Description: 

GT Power High Power 3W Aircraft Lighting System

This lighting set is the ultimate system from GT Power and contains the brightest LEDs GT Power makes.  These are seriously bright high power 3 Watt LED lights.  Looking at them from a meter away will leave spots in front of your eyes.  Unfortunately photographs cannot demonstrate how bright and impressive these LEDs are.  The kit has a High Power control board with a Power connector wire (2S-JST), mechanical wired switched, and a Signal wire (JR) that simulates actual aircraft navigation lighting.  The system has been designed according to real aircraft navigation lighting standards featuring beacon, navigation and strobe lights to make your aircraft look more realistic.  A great way to add a level of scale realism to your models and it is extremely easy to install.  Using long life, super-bright (3 & 5mm diameter) LEDs, you will not have any trouble seeing any model they are installed in!  All LEDs or LED combinations have separate plugs so they can be moved around for different lighting combinations. 

The system requires a 2S Lipo with a JST balance plug.  The balance connector is how the system is powered and connects to the light controller board.  The kit consists of eight bright LED lights, a control board with power lead, switch, and signal lead, plus clamps and zip ties for securing the LEDs to the fuselage and wings of your aircraft, as well as double-sided tape for securing the control board within the fuselage.

FEATURES:

  • Simulates the realistic lighting of real aircraft with 9 Operation Modes including Civil Aviation Standards
  • Low voltage detection, when the battery voltage is lower than 6.8V, all lights flash
  • 8 lights, red anti-collision lights, white flashing lights, navigation lights and landing lights
  • Mechanical on/off switch and can be connected to any switched channel on your receiver

SPECIFICATIONS:

  • Input Voltage: 4.8V - 6.0V
  • Working Current: 1200mA
  • Control Box size: 55mm x 52mm x 9mm
  • LED Wire: 820mm
  • Power Cable Length: 300mm
  • Weight:100g

INCLUDES:

  • 1 Control Box 
  • 8 LED Lights
  • 1 Manual
  • 1 Accessory Packet






: *
: *
: *
 
Wolf 2 Buggy RTR, 1/10 Scale, 4WD, w/ Battery, and Charger

Wolf 2 Buggy RTR, 1/10 Scale, 4WD, w/ Battery, and Charger

RGRB1208 

DHK8138

$149.99

Gloster Meteor F8 Twin 70mm EDF Jet V2 6S 12-Blade with Split Flaps

Gloster Meteor F8 Twin 70mm EDF Jet V2 6S 12-Blade with Split Flaps

Description:

RedwingRC Plug-and-Play aircraft!

Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with twin powerful Brushless Electric Ducted-Fans. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.

 

Key Features:

  • Powerful 70mm EDF fan unit and motor
  • 60A Brushless ESC with Switch-Mode BEC
  • retractable landing gear
  • Easy to build.
  • SUPER FAST

Specifications:

Wingspan: 35.8 inch (910mm)
Overall Length: 43.3 (1100mm)
Flying Weight: 38.8oz (1100g) w/Battery
Fan Unit: 70mm fan unit (installed with motor)
Motor Size: Powerful 400 high speed outrunner brushless motors (installed)
Radio / Transmitter: 5 Channel Required - (Not Included)
Receiver: 5+ Channel (Not Included)
Servos: 4 servos installed ( 4 x 9g )
Speed Control : 1 x Dectrum 60A Brushless with Switch-Mode BEC (installed)
Battery: 14.8V 2600 mah 25C LiPo (Not Included)
Charger: NOT INCLUDED 2S - 4S lipo charger
Flight Time:

Average (6-10 mins)
 

 
 

 

 


 

DY8974V2

$399.99

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and 2.54MM HEADER PINS

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and 2.54MM HEADER PINS

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2.54MM HEADER PINS

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0070H

$48.00


Back to Top