Booma RC Adjustable Voltage Boost (Step Up) Regulator

Contact UsCustomer Reviews

Booma RC Adjustable Voltage Boost (Step Up) Regulator

Market Price: $39.95
Our Price:

$29.95


You Save

25%

Quantity (10)

Availability 10 in stock
Weight 0.10 lbs
SKU BRC-434
Manufacturer Booma RC

Quick overview--Adjustable Voltage Boost Regulator range between 3.5v to 32v output.

Use this regulator in turbine and scale propeller models to get the most out of the AR lighting system. Connect it to a 2 cell LiFe/Lion receiver pack and adjust the output up to 13.5 volts. This  will give the maximum brightness for the AR ILS-01 system. This regulator allows pilots to drive several voltage systems like electric retracts, hydraulic retracts lights and or mini air compressor from a single battery. The uses for this regulator are endless.

So, if you need to drive a higher voltage system like the AR ILS-01 lighting system or a retract set then this clever voltage boost (step up regulator) is the ideal choice. You simply connect any battery from 3.5 volts to the input, dial up the required output voltage by turning the multi turn voltage adjustment screw and your done. 

- Works with all RC battery chemistries (minimum battery pack input voltage of 3.5 volts).

- Adjustable regulation voltage range from battery input voltage up to 32 volts on output. 

- Up to 5 Amp (Max) input current capability.

- 3.7 V to 5 V / 2 A 82.5% efficiency
- 5 V to 12 v / 2 A 88.4% efficiency
- 7.4 V to 12 V / 2 A 90.2% efficiency

- Ideal to drive the AR lighting system from a lower voltage battery.

- Allows mixing lights/electric or hydraulic retracts/mini air compressor etc. from a single auxiliary battery. 

- Weight 37 grams.

- Dimensions 67mm x 42mm.

: *
: *
: *
 

Male Deans to Female TRX Traxxas Connector Adapter

Male Deans to Female TRX Traxxas Connector Adapter 

 

Description:

Deans T Plug Female to XT90 Male Connector Adapter

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

EX-DeansM-TRXF

$3.99

Canister Muffler (Rear Exit) Curved Header 20-30cc Engine

Canister Muffler (Rear Exit) Curved Header 20-30cc Engine
This Canister is easily connected to the DLE 30 or DLE55 engine without adding much extra weight. The canister will significantly reduce the nosie of the engine, and also allow you to keep from having to cut up your cowl as much as with a muffler.

The 30cc Canister Muffler:

This muffler is designed with three levels of filters for the best sound dampening effect and feautures an oil proof converted silicone tube on the end of the muffler. The design makes this muffler very convenient for users to install them on engines.

Secure connection is ensured by the anti-skid joint on the muffler and the included installation clips.

The muffler is made of soft aluminum and is brushed into frosted texture.

Works even better than before at low to medium speeds.

Fast response.

Strong and light weight pipe.

Easy installation.

Includes mufflers, tubes, and clips.

 



SPECS:
See photos for dimensions

Rear Canister Muffler 20-30cc

$59.99

Paraboard Parallel Charging Board /Deans (T-Plug) Connector

Paraboard Parallel Charging Board for Lipo /Deans (T-Plug) Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

EPB-Deans

$14.95