RedwingRC Accessories

Tariff Information update

The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.

more offers

BMS-M23C MAGNETIC , HV-DIGITAL, HIGH TORQUE, SUPER HIGH SPEED, CORELESS +Servo Arm (35.6kg/494.5oz, 0.05 sec at 8.4V)

Ask a question about this product

Printable version

Options

Our Price:

$99.99

Quantity (24)

Details


Availability	24 in stock
Weight	0.51 lbs
SKU	BBR-BMS-M23C
Manufacturer	Blue Bird

BMS-M23C MAGNETIC , HV-DIGITAL, HIGH TORQUE, SUPER HIGH SPEED, CORELESS +Servo Arm (35.6kg/494.5oz, 0.05 sec at 8.4V)

Magnetic so no friction from a Potentiometer!

Smoother (magnetic), Precision, More Reliable & More Efficiency

Soft Start Protection
Over Voltage Protection
Low Voltage Protection
Locked Rotor Protection
Temperature Protection
Magnetic Hall-effect Sensor w/ High-Efficiency Brushless Motor.

Application / Suitable

Awesome for 1/8th Buggy / On-Road Car & 3D Airplane, Helicopter Cyclic.

Electrical Specification (Function Of The Performance)

Torque At 6.0V	24.4 kg-cm / 338.9 oz-in
Torque At 7.4V	29.8 kg-cm / 413.9 oz-in
Torque At 8.4V	35.6 kg-cm / 494.5 oz-in
Speed At 6.0V	0.07 sec / 60°
Speed At 7.4V	0.06 sec / 60°
Speed At 8.4V	0.05 sec / 60°

Protection Mechanism

Soft Start Protection	Soft start back to neutral position.
Over Voltage Protection	Over 9.0V drive the protection mode, and 8.4V return to normal mode.
Low Voltage Protection	Lower than 4.0V, drive the protection mode, and 4.5V return to normal mode.
Locked Rotor Protection	Stall in 5 sec, output torque goes down.
Temperature Protection	Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection	When losing the transmitter signal, that servo will be back to the neutral position immediately and lock.

Power Supply

Operating Voltage Range

4.5V ~ 8.7V DC ( 2S HV Li-Poly / 2S Li-Fe Compatible )

Control Specification

Control System	Higher-order Algorithm of【STMicroelectronics】32-bit MCU ( Microcontroller Unit ) Frequency：Up to 400Hz & 1500us or 1520us
Frame Rate (Signal repeat rate)	Under 1ms【Compatible with Futaba_SR & Sanwa_SXR Dual-Mode】
Dead Band Width	0.001ms ( Default：1us)
Potentiometer (Variable Resistor)	Magnetic Hall-effect Sensor【Non-Contact】instead of traditional VR.

Mechanical Specifications

Ball Bearing	Dual, Stronger Ball Bearings.【EZO from Japan】
Gear	Stainless Steel Output gear with All steel gears
Outside Case	Full One-Piece Aluminum CNC Casing
Motor	Custom High-Efficiency Coreless Motor
Horn / Gear Spline	25 Teeth

Physical Specifications

Dimension (mm)	40.5 x 20 x 39 mm / 1.59 x 0.79 x 1.54 in
Weight (gram)	81.5 ± 1 grams / 2.87 oz
Product Picture / Dimension Sketch

Includes Servo and Servo Arm

3-in-1 Methanol Nitro Ignition with HV Switch and Digital Voltmeter

3-in-1 Methanol Nitro Ignition with HV Switch with Digital Voltmeter, RCCSKJ, 2106#

RCCSKJ-Switch-Meth-ignitor-2106

$19.90 19.90

Miracle Brushless Smoke Pump

New Miracle Brushless Smoke Pump

Description:

Introducing the Red Miracle Brushless Motor Smoke Pump! These light weight pumps have a CNC processed 6061 case with a Japanese high speed oil seal. The brushless motor/ESC supply smooth transmission and helps avoid the possibility of a spark.

Basic Set up:

First connect the pump to the ESC, fuel filters, muffler and smoke tank (drawing included to help with this).Plug your radio connector into the switched channel (such as landing gear or flaps). Turn on radio, make sure switch is off (100% negative) for at least 5 seconds and turn on. If the pump pushes fluid toward the muffler, the set up is correct. If it tries to pump toward the tank, please change any two wires' connection of the three wires connect the brushless motor and ESC.

Radio Set up:

3. Non programmable Radios

Use a switched channel to switch the Smoke pump on and off. Since there is no trim control on a switched channel, the flow rate is consistent. When the switch is on, flow will be at maximum. We can set the END POINT/ATV of radio switch channel to control the maximum flow rate so as to control the smoke density.

4. Programmable Radios

Plug the smoke signal wire into a spare channel (such as the 8th channel). Set this channel program mixing the Throttle channel, then set a switch for programming mixing on/off to control smoke pump on/off. Adjust the END POINT/Travel of this channel to control smoke pump flow rate so as to control the smoke density. For more detailed information please see your radio manual.

Specifications:

Weight: 3.32 oz (94g)
1100KV Brushless Motor
10 Amp Brushless ESC
Input: 2-cell lipo or Li-FE (6-cell NiMH)
CNC processed 6061 anodized aluminum
Fuel resistant fiberglass filled nylon gears

**DO NOT dry run pump! This may cause failure and will void warranty.**