RedwingRC Accessories

Tariff Information update

The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.

more offers

90A ESC with Heat Sink BEC

Ask a question about this product

Printable version

Options

Market Price: $86.99

Our Price:

$66.99

You Save

23%

Quantity (1)

Details


Availability	1 in stock
Weight	0.25 lbs
SKU	BBR-BSC-90A
Manufacturer	Blue Bird

90A ESC with Heat Sink BEC, Suitable for 2S-6S Airplane, Glider or Heli

FEATURES:

Smooth forward operation
Extremely low resistance
32KHz Frequency operation
P.O.R Power on reset
Easy user programmable features
Audible arming signal
Microprocessor Controlled
B.E.C: 5.0V / 3.0A
Programmable low volt cut off for Li-Po
Safe start protection
Micro size allows for ease of installation
Programmable motor rotation

SPECIFICATIONS:

Size: 70 x 29 x 17 mm

Weight: 60 g

Max Continuous Current: 90 Amps

Operating Voltage Range: 6 to 15V

On Resistance: 1.17 mOHM

Max BEC Output: 4 Amps @ 5.0V

2S~6S Lithium, 6~19 Cell Ni, with Heat Sink

DETAILS:

Watt-out-put limit: The output is rated at 388 watts. Under this watt, the speed controller will work normally. When the wattage reaches approximately 410~420, it will automatically shutdown to prevent the speed controller from overloading.

Temperature protection: When the temperature reaches 95 degrees C, the speed controller will slowdown and the output will reduce to 50% and the on board LED will turn on. You must move the throttle stick to idle position to reset the speed controller and will work once you throttle up again.

Warning:

DO NOT install a motor which rating is larger than the speed control’s limit to avoid damage or burn down.

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.

Specifications:

Torque:
- 143 oz/in at 4.8V (10.3 kg/cm)
- 168 oz/in at 6V (12.1 kg/cm)
Speed:
- .23 sec at 4.8V
- .18 sec at 6V
Voltage: 4.8V - 6V
Weight: 2.11oz (59.82g)
Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
Motor Type: 3 Pole Ferrite
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length: 11.81" (300mm)
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Temperature Range: -20 to +60 Degree C
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 8usec
Potentiometer Drive: Indirect Drive
Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99 45.99

Quick Connect Ball Joint

Quick connect ball joint for the throttle. Easy to connect throttle links!

Comes in Pairs!, smaller than our standard ball joints.

SD-519B50

$10.00 10.00

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme)

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme) This is a set of 2 wings (left & Right) will need to be re-covered to match your scheme. Please contact us if you are in need of a single 50cc size wing.

Includes Silver Side Force Generators

50 Wing2

$90.00 90.00