BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to battery) 126.5kg/1757.1oz .15sec @8.4V

Contact UsCustomer Reviews

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to battery) 126.5kg/1757.1oz .15sec @8.4V

Our Price:

$199.99


Quantity (10)

Availability 10 in stock
Weight 0.80 lbs
SKU BBR-BLS-125AWB
Manufacturer Blue Bird

Special Order! This is a special order item and is subject to manufacturer availability. Please allow a minimum of up to 2 weeks for processing before items are shipped. No cancelations or returns are permitted.

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to battery) 126.5kg/1757.1oz .15sec @8.4V--Blue Bird's most powerful 1/4-1/5 scale Monster Truck/Crawler/Large Boat servo at over 1750oz!!

Water Proof IP67 (Ingress Protection Rating, 6=Dust Tight, 7=Immersion up to 1Mfor 30 min)

Application / Suitable
1/4、1/5th Scale Vehicles, such as Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler & Large Boats, etc.

 

Specifications
Stall Torque At 6.6V 99.5 kg-cm / 1382.1 oz-in
Stall Torque At 7.4V 111.4 kg-cm / 1547.3 oz-in
Stall Torque At 8.4V 126.5 kg-cm / 1757.1 oz-in
No-load Speed At 6.0V 0.19 sec / 60°
No-load Speed At 7.4V 0.17 sec / 60°
No-load Speed At 8.4V 0.15 sec / 60°
Stall Current At 6.0V 11.7 Amp
Stall Current At 7.4V 13.5 Amp
Stall Current At 8.4V 15.4 Amp

 

Protection Mechanism
Soft Start Protection Soft start back to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode, and 8.7V return to normal mode.
Low Voltage Protection Lower than 5.8V, drive the protection mode, and 6.0V return to normal mode.
Locked Rotor Protection Stall in 3 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection When losing the transmitter signal, that servo will immediately be back to the neutral position and locked.

 

Power Supply
Operating Voltage Range 6.0V ~ 8.7V ( 2S Li-Fe / 2S Li-Poly HV )
Operating Temperature Range -20°C ~ +60°C ( -4°F ~ +140°F )

 

Control Specification
Control System Higher-order Algorithm of【STMicroelectronics】32-bit MCU
AD 12-bit Resolution ( 4096 Steps )
Frequency:Up to 400Hz & 1500us or 1520us
Frame Rate (Signal repeat rate) Under 1ms【Auto-adaptive with Futaba_UR/SR & Sanwa_SXR & KO_HCS Mode】
Dead Band Width 0.002ms ( Default:2us)

 

Mechanical Specifications
Ball Bearing Dual, Stronger Ball Bearings with 1 piece of oil seal.【NMB from Japan】
Gear Stainless Steel Output Gear With All Steel Gears
Motor High-Efficiency Brushless Motor
Outside Case Full Aluminum Alloy Case
Horn / Gear Spline 15 Teeth ( Universal Type )
Connected Cable Length 300 mm (11.81 in) [ TYU : Black w/ Gray & JST : Red w/ Black ]
Connected Housing Universal Connector [ Black ] + JST Connector [ Red ]
Ingress Protection Rating IP67 means: 6=Dust Tight / 7=Immersion up to 1 Meter depth of 30 minutes

 

Physical Specifications
Dimension (mm) 65.8 x 30 x 56.5 mm / 2.59 x 1.18 x 2.22 in
Weight (gram) 229.0 ± 1 grams / 8.08 oz W/O Cable
Product Picture / Dimension Sketch


Includes Servo and Aluminum Servo Arm

 

: *
: *
: *
 

MPI Aluminum Servo Arms

Description:

MPI servo arms are made with heavy duty anodized aluminum offset servo arms designed for Hitec, Futaba, XQ Power, Power HD Servos. These MPI servo arms are drilled and tapped for 4-40 with a starter hole for another hole closer in if necessary. The clamping arm on these MPI arms ensures a safe and secure installation, minimizing any risk of slop or the arms coming loose. 

We recommend the following sizes of MPI arms for the planes below:

30cc planes typically use 1.25" for ailerons and elevators, and 3" for rudder.

50cc planes typically use 1.25-1.5" for ailerons and elevators, and 3.5" - 4" for rudder.

100cc planes typically use 1.5" for ailerons and elevators, and 4" for rudder.



1.25", 1.5", 3", 4" Sizes
Available for HiTEC, XQ Power, PowerHD, Futaba Servos

MPI Arms feature:
Bracing for Extra Strength
Lightweight and Strong
Extra Security Screw to Keep Arms on
Pre Dented to Allow for Optional Holes


Futuba style arms fit: Power HD, XQ-Power, and Futaba
Hitec fit: Hitec


**Now introducing new size! 2-inch lengths for HiTec and Futaba!

MPI Servo Arm Pricing:
  • 1.25" arm $8.90
  • 1.5" arm $10.25
  • 2" arm $11
  • 3" rudder arm $15.25
  • 4" rudder arm $16.95

KA -

$11.00

Orbit FPV Pocket Drone RTF

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

RGR3050

$69.99

PULSE 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery

PULSE 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Pulse Lithium Polymer Batteries - Setting a New Standard.

As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored. 

Designed specifically for the demands of the latest power plants, not to mention the new realm of extreme 3D flight, Pulse brings a whole new battery to bear at a cost never seen before. Simply put, premium power no longer comes at a premium price.

Incorporating the latest advancements in Lithium Polymer technology, Pulse Batteries are designed to bring performance levels to a new stratosphere with 35C, 45C, and 65C battery packs in multiple capacities for the helicopter of your choice. Add the 5C charge rates, and the fun just begins. 

Pulse Lithium Polymer Batteries - Can You Feel Your Pulse Quicken?

Pulse Batteries Available Individually or in a PRE-MADE System!

Take the guesswork out of your electric battery set up- we've done it for you! Check out the suggested set up systems for 30cc and 50cc.

LiPo 4500mah 5S, 18.5v - $104.99 each

30cc 10S System: Two (2) LiPo 4500mah 5S, 18.5v - $208

  • Voltage: 18.5V
  • Cell Count: 5S
  • Capacity: 4500mAh
  • Discharge Rate: 45C
  • Dimensions: 159mm x 45mm x 38mm (LxWxH)
  • Weight: 630g
  • Balance Tap: JST-XH


LiPo 3300mah 45C 6S, 22.2v - $94.99 each

30cc 12S System #1: Two (2) LiPo 3300mah 45C 6S, 22.2v - $188

  • Voltage: 22.2V
  • Cell Count: 6S
  • Capacity: 3300mah
  • Discharge Rate: 45C
  • Charge Rate: 5C
  • Dimensions: 139mm x 42mm x 43mm  (LxWxH)
  • Weight: 567g
  • Balance Tap: JST-XH


LiPo 3700mah 45C 6S, 22.2v - $109.99 each

30cc 12S System #2: Two (2) LiPo 3700mah 45C 6S, 22.2v - $218

  • Voltage: 22.2V
  • Cell Count: 6S
  • Capacity: 3700mAh
  • Discharge Rate: 45C
  • Charge Rate: 5C
  • Dimensions: 138mm x 44.5mm x 48mm (LxWxH)
  • Weight: 567g
  • Balance Tap: JST-XH


LiPo 4100mah 45C 6S, 22.2v - $119.99 each

30cc 12S System #3: Two (2) LiPo 4100mah 45C 6S, 22.2v - $238

  • Voltage: 22.2V
  • Cell Count: 6S
  • Capacity: 4100mAh
  • Discharge Rate: 45C
  • Charge Rate: 5C
  • Dimensions: 137mm x 53mm x 42mm (LxWxH)
  • Weight: 680 grams
  • Balance Tap: JST-XH


LiPo 5000mah 45C 6S, 22.2v - $139.99 each

50cc 12S System #1: Two (2) LiPo 5000mah 45C 6S, 22.2v - $278

  • Voltage: 22.2V
  • Cell Count: 6S
  • Capacity: 5000mah
  • Discharge Rate: 45C
  • Charge Rate: 5C
  • Dimensions: 158mm x 45mm x 49mm  (LxWxH)
  • Weight: 800g
  • Balance Tap: JST-XH


LiPo 5500mah 45C 6S, 22.2v - $149.95 each

50cc 12S System #2: Two (2) LiPo 5500mah 45C 6S, 22.2v - $298

  • Voltage: 22.2V
  • Cell Count: 6S
  • Capacity: 5500mah
  • Discharge Rate: 45C
  • Charge Rate: 5C
  • Dimensions: 160mm x 44.5mm x 52mm  (LxWxH)
  • Weight: 873g
  • Balance Tap: JST-XH


LiPo 6000mah 35C 6S, 22.2v - $149.99 each

50cc 12S System #3: Two (2) LiPo 6000mah 35C 6S, 22.2v - $298

  • Cell Count: 6S 22.2V
  • Capacity: 6000mah
  • Discharge Rate: 35C
  • Charge Rate: 5C 
  • Dimensions: 160mm x 49mm x 51mm  (LxWxH)
  • Weight: 884g
  • Balance Tap: JST-XH

 

Purchase pre-made system or buy individually! Select below.

 

PLUTX-2550-3S

$27.99