RCGF 60CC Twin Gas Engine

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

• Type: LiFe Battery (same technology as A123)
• Weight:
  • 3S 2100mah - 6.2oz
  • 3S 3100mah Life - 9oz
• Size:
  • 3S 2100mah- 95mm x 29mm x 30mm
  • 3S 3000mah- 130mm x 42mm x 20mm
• Voltage:
  • 3S 2100- 9.9 Volts
  • 3S 3000- 9.9 Volts
• Discharge rate:
  • 20c maximum continuous
  • 40c maximum burst
• 14gauge Wire
• Connectors: XT-60 Connector
• Balancing lead

These batteries have the XT-60 connector.
 

• 3S 2100mah - $33.99
• 3S 3000mah - $49.99

****Batteries must ship surface mail due to hazmat restrictions and have been taking longer to reach destination****Express and Priority mail are not an option for surface ground mail.

Weighted Fuel Clunk

Fuel clunks are a must for aerobatic flying. It insures that fuel is always flowing to the engine because the fuel line will follow gravity inside your tank. Without one, you increase the chance that your plane may stall when flying inverted or performing different maneuvers. Installing a fuel clunk is simple to install and an investment that any serious pilot should make.

13x16mm

.4 oz

Dynam Focke Wulf FW-190 Warbird V3 4S 1300mm (50") w/ Flaps

RedwingRC Plug-and-Play aircraft!

The Dynam T28 Trojan is a great plane for both beginners and experienced pilots! Just getting started in the hobby or just want to try something new, this plane is for you. The Trojan T28 is made with EPOFLEX (EPO) foam- a damage resistant foam. This aircraft is painted with the famous US Air force color scheme. All surfaces are constructed out of the EPO foam so it is not easily damaged and easily repaired. The Trojan is very stable and is a blast to fly! This is a Plug-and-Play aircraft so it will arrive about 80% complete and included cool scale features such as a clear canopy, retractable landing gears and steerable nose landing-gear .

Build time is around 60 min from box to air.

Expect flight time to be from 6-10 minutes per battery.

Key Features:

• Powerful BM3715 - 890KV outrunner brushless power system
• 30A Brushless ESC
• Retractable landing gears
• Durable and lightweight EPO construction with many surface details
• Detailed Body Structure
• Suitable for both, beginner thru experienced Pilots
• Easy to build
• Scale 3 blade prop

Specifications: