BG-0828SW (SAIL WINCH), DIGITAL, BRUSHLESS

Untitled Document

Description:

Similar to the Storm series of our new Power HD servos - the high voltage D-series are a coreless servo with the same hardened aluminum case and splash water protection.

These HD D18 servos are capable of 7.4 volts in 10 seconds and are made with the finest titatanium and aluminum gears. The long lasting coreless motor guarantees quality performance for a lifetime at lower temperatures.

Durable!

Dynamic!

InDestructible!

Distinguished!

Dirt Cheap!

Dapper! - The "D" in our new Power HD D18 high voltage servos stands for all of these things and MORE!

Specs:

• Torque:
  • 201.3 oz/in at 6V ( 14.5 kg/cm)
  • 249.9 oz/in at 7.4V (18.0 kg/cm)
     
• Speed:
  • .12 sec at 6V
  • .10 sec at 7.4V
     
• Voltage: 6.0 ~ 8.4 V
• Weight: 2.6 oz (75g)
• Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
   
• Operating Temp - -20~60centigrade
• Working Frequency - 1520μs / 333hz
• CORELESS Motor
• Double Ball Bearings
• Titanium and Aluminum gears
• Water resistant O-Rings

Weighted Felt Fuel Clunk

Fuel clunks are a must for aerobatic flying. It insures that fuel is always flowing to the engine because the fuel line will follow gravity inside your tank. Without one, you increase the chance that your plane may stall when flying inverted or performing different maneuvers. Installing a fuel clunk is simple to install and an investment that any serious pilot should make.

13x16mm

.4 oz

1 Meter Balsa Wood Sheets  (1-10mm Thick)

Please contact us for information on if your plane is using Ultracote, or TruCote before ordering if you are unsure

Description:
TruCote covering is a high tech polyester covering that is sensative to heat which makes it easy to apply to your plane. It offers high adhesion, fuel proof/waterproof covering for your plane. Easy to apply using a heat gun and/or iron.

• Specs:
• Width: 23.5”
• Temp to adhesion: Approximately 250 degrees F
• Shrinkage begins: Approximately 275 degrees F
• Maximum recommended temp: Approximately 300 degrees F

For instructions on how to apply covering here is a helpful tutorial:

http://www.rc-airplane-advisor.com/heat-shrink-covering.html


Sold in 1 Foot Sections. Please select how many feet you want.

Please put what plane this is for at checkout so that we can match it!