New 2020 Mini X320 Park Flyer Water and Land RTF with GYRO and LEDs

Contact UsCustomer Reviews

New 2020 Mini X320 Park Flyer Water and Land RTF with GYRO and LEDs

Market Price: $79.99
Our Price:

$59.99


You Save

25%

 

FREE SHIPPING

Quantity (7)

Availability 7 in stock
Weight 5.00 lbs
SKU X320-RTF
Manufacturer Redwing RC

Mini X320 Park Flyer Water and Land RTF  with GYRO and LEDs

Check out the this unique 3-1 Sea, Land and Air prop jet! This is a High Speed Prop Sport Jet that will takeoff and land on the water or land (launch from cement or asphalt road, sand stone land, park lawn, water, etc., can also  hand thrown)...How cool is that?! There are no servos in this plane and turns, climbs and descent are accomplished by prop differential speeds. The Intelligent gyro, makes the plane fly stable and smooth. The X-320 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, the airplan is entirely waterproof and ready to fly out of the box. And finally, it comes with LEDs that are already pre-wired and can be attached to the leading edge of the wings for some spectacular night flying! Complete RTF bundle with everything in the box. It flies absolutely great right out of box without having to do any additional setup. Its very beginner friendly and offers plenty of flight time up to 15 minutes on the included 300mAh battery.

Key Features:

  • Long Flight Times, 3.7V 300mAh battery, can fly for about 15 minutes.
  • Special high-density, durable waterproof EPO foam material...The entire aircraft is waterproof!!
  • Takeoff from land or water (Speed boat or plane!)
  • No assembly required...RTF out of the box
  • LEDs for night flying
  • Unique prop differnetial does all the turns, climb and descend...no servos!
  • Intelligent gyro, make the plane fly stable and smooth.

Specifications:

  • Material : Durable EPP material and silicone nose cone
  • Wingspan : 320mm
  • Battery : 1S 3.7V 300mAh*1
  • Charger : USB charger*1

Free shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.


: *
: *
: *
 

Hellcat V2 4S with Flaps

Description:

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

Say hello to the F6F, also known as the Hellcat. This plug and play version is made from EPO foam which has proven to be crash resistant. If you are a warbird enthusiast, then the Hellcat is a must!

Superb maneuverability at slow speeds even at low speeds and designed for large loops, knife edges, and inverted flights! Just like all the planes from Dynam RC, the Dynam F4F Hellcat comes with a pre-painted finish and is an excellent representation of the real thing. The pre-installed retracts are a super great feature that really add to the scale appearance of the plane. With the PNP Hellcat you can experience the NEW retract system- now the landing gears rotate and tuck into the wings.

Bonus Feature: The Dynam Hellcat F4F is flap ready. The wings have the cutouts for the servos and hinges. You will need to supply the servos and servo reverser (if your radio does not have this feature)

All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying.

Build time is around 45- 60 min from box to air. Expect flight time to be from 8-12 minutes, but all depends how fast you fly.

 

Key Features:

  • Retractable landing gear allow for smooth takeoffs and landings and scale flying
  • Powerful Detrum BM3170 brushless motor (500kv)
  • 40A Brushless ESC with Switch-Mode BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Steerable tail wheel.

 

Specifications:

Wingspan: 50in (1270mm)
Overall Length: 41.5in (1054mm)
Flying Weight: 1600g (1600g) w/Battery
Motor Size: BM 3170 500kv (installed)
Propeller: Dynam 13 x 7 x 3 (3 bladed prop)
Radio / Transmitter 5 Channel (NOT INCLUDED)
Receiver 5+ Channel (not included)
Servos: 4 servos total (2 x 9g & 2 x 17g) - Installed
Speed Control : 40Amp (dectrum) - Installed
Battery: 14.8C LiPo 2200 mah (Not Included)
Charger:  
Flight Times

8 to 12 Min

Assembly Time

45 to 60 min

 

 

 


 

DY8958

$259.00

Hot RC Transmitter HT-8A Digital TX/RX 8ch set (TX+8ch RX)

Hot RC Transmitter HT-8A Digital Transmitter 8ch set (TX+8ch RX)

DW-HT8A-Radio

$59.99

GT-Cygnus F3L and F5L RES 1970mm ARF (F3/F5-RES Competition Pure Glider or Electric Motor)

GT-Cygnus F5L RES Catapult Launch Glider 1970mm ARF (Electric Motor)

The GT2000v2 Powered Glider is a high-performance competition grade glider with light weight carbon fiber and wood construction ideal for precision competition or a gentle relaxing flight. With its elegant wings and carbon fiber fuselage it responds superbly to thermals.

The GT2000v2 version has integrated carbon fiber throughout the model to maximize strength and performance while improving the quality, reducing weight and increasing the performance of glider. Below is a list of improvements from version 1:

  • Thinner/lighter fiberglass battery compartment
  • Carbon fiber canopy and tail pipe
  • Wings constructed with carbon fiber main beam and carbon tube latch with three-stage plug-in structure design for easy transport
  • Thinner wings and optimized airfoil to improve gliding performance
  • Most accessories are made of carbon fiber with improved strength and lighter weight
  • Tail wing incorporates a torsion spring to improve return to center and lighter weight structure

Maximized strength is provided with the carbon fiber tail pipe and carbon fiber reinforced wings so the glider can withstand high speed precise flights setting new standards in the 2M wingspan class. The ailerons and flaps are a wide and long feature, making pin-point landings easy while also improving the launch characteristics and giving the pilot a broad performance spectrum for high speed, aerobatics and thermalling.

The planes docile flying characteristics and excellent performance in the air ensure that the GT2000v2 provides maximum flying pleasure, whether you are a weekend pilot or flying in a competition. You will enjoy floating through the air for long periods, as well as lively aerobatics- all with style and precision.

The model comes as a kit version only due to multiple different power system and competition requirements for pilots. Below are some suggestions:

  •  Recommend a motor with reverse shaft and outer diameter of 28mm, such as XM2838 P5B special motor, or higher performance motor
  • ·May use standard size 9g servos for the tail and wing; however due to the thin wing must use smaller wing servos such as KST08, GDW1906, or Blue Arrow D0474HT MG for the aileron and flap. The thickness of the servo should be less than 9mm and the torque greater than 2kg.

Specs:
Wing Span: 2000MM
Length: 1120MM
Wing Area: 30.3dm2
Flight Weight: 670g
Servos: 9g*6
Motor: XM2838 P5B 1800KV
Esc: 40A (as required based on motor)
Propeller: 8x6E (as required based on motor)
Battery: 3S 11.1V 1300mAh (as required based on motor)

CG: about 45mm from the front leading edge of the wing

GT-F3L/F5L-Cygnus

$450.00