BMS-A10 MICRO, HORIZONTAL MOUNT, HV-DIGITAL, F3K

Ask a question about this product

Printable version

Options

Our Price:

$46.99

Quantity (13)

Details


Availability	13 in stock
Weight	0.30 lbs
SKU	BBR-BMS-A10V (horizontal)
Manufacturer	Blue Bird

BMS-A10 MICRO, HORIZONTAL MOUNT, HV-DIGITAL, F3K

Blue Bird has entered the F3K/DLG servo market with these new micro digital servos. Purpose built for F3K.

The A10 digital series of servos feature metal gears, cnc aluminum cases, and a coreless motor. The A10 series are some of the lowest weight F3K servos available at just 7.3-7.4 grams depending on case configuration.

Capable of use with 1-2 cell LiPo batteries.

Blue Bird boasts impressive specifications for these units. Click the link below for a detailed specification sheet.

Data Sheet Here

APPLICATION / SUITABLE

3D EP Airplane / DLG / HLG / F3K / F3P

SPECIFICATIONS

Torque At 3.7V	1.6 kg-cm / 22.2 oz-in
Torque At 6.0V	2.4 kg-cm / 33.3 oz-in
Torque At 7.4V	2.9 kg-cm / 40.3 oz-in
Torque At 8.4V	3.2 kg-cm / 44.5 oz-in
Speed At 3.7V	0.15 sec / 60°
Speed At 6.0V	0.10 sec / 60°

Speed At 7.4V

0.08 sec / 60°

Speed At 8.4V

0.07 sec / 60°

POWER SUPPLY

Operating Voltage Range

3.7V ~ 8.4V ( 3 ~ 6 Cell Ni-MH or 1 ~ 2S LiPo / 2S LiFe )

MICRO SERVO

Control System	Digital Controller 12-Bits ( 4096 Steps ) / Frequency：333Hz / Neutral：1500us
Dead Band Width	0.002ms ( 2us )

Frame Rate (Signal repeat rate)

3ms ( Maximum )

Rotating Direction

Clockwise / Pulse Traveling 1500 ~ 1900u sec

Operating Travel

90° ( When 1100 ~ 1900 μ sec )

MECHANICAL SPECIFICATIONS

Ball Bearing	Dual, Stainless
Gear	All Precision Metal Gears
Motor	Metal-Brush Coreless Motor
Horn / Gear Spline	19 Teeth ( φ3.65 m/m )

Cable Length

150 mm ( 5.9 in )

Connector

Universal Connector ( J-Type )

PHYSICAL SPECIFICATIONS

Dimension (mm)	22 x 8 x 15.3 mm / 0.86 x 0.31 x 0.60 in
Weight (gram)	7.4 ± 0.5 grams / 0.26 oz

Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Type:	DSMX Compatible Full Range Receiver
Number of Channel:	6
Modulation:	DSMX Compatible (Also DSM2 backward Compatible)
Band:	2.4 GHz
Dimension:	25(L) x 18(W) x 11(H) mm
Weight:	4.5 grams + 2.5 grams
Voltage Range:	3.45 - 8.4 V

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

Plug bind plug to the receiver.
Provide power to the unit. LED flashes quickly.
Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
Remove bind plug.

Setting Failsafe

Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
Ensure that transmitter and receiver are turned on.
Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
Set transmitter controls to the desired failsafe positions.
Press the side pushbutton to memorize failsafe settings.
Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
Remove bind plug.
Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.