Spektrum AR400 4-Channel DSMX Aircraft Receiver

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

Safe 40A Paraboard V3 Parallel Charging Board /XT60 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

R1 Rock Crawler Buggy RTR, 1/10 Scale, w/ a Tube Frame, and 4WD