70A ESC with Heat Sink BEC
70A ESC with Heat Sink BEC, Suitable for 2S-5S Airplane, Glider or HeliFEATURES:
SPECIFICATIONS: Size: 70 x 29 x 16 mm Weight: 50.5 g Max Continuous Current: 70 Amps Operating Voltage Range: 6 to 15V On Resistance: 1.28 mOHM Max BEC Output: 3 Amps @ 5.0V 2S~5S Lithium, 6~19 Cell Ni, with Heat Sink
DETAILS: Watt-out-put limit: The output is rated at 388 watts. Under this watt, the speed controller will work normally. When the wattage reaches approximately 410~420, it will automatically shutdown to prevent the speed controller from overloading. Temperature protection: When the temperature reaches 95 degrees C, the speed controller will slowdown and the output will reduce to 50% and the on board LED will turn on. You must move the throttle stick to idle position to reset the speed controller and will work once you throttle up again. Warning: DO NOT install a motor which rating is larger than the speed control’s limit to avoid damage or burn down.
|
EPP Mini Shark Airplane 39.4" (1000MM) Wingspan
31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4) |
DW-E1401
$64.99
HV Dual Charging Switch (Futaba/JR Connector)
HV Dual Charging Switch (Futaba/JR Connector) |
Rccskj-Dual-HV-switch-2111
$19.99
FlyWheelz Alu Hub Light Foam Wheel 2.25"/5.71cm
FlyWheelz Alu Hub Light Foam Wheel 2.25"/5.71cm |
SPO-WRA-004-2.25
$11.50